Spring Loaded Tank Vent Valve | Valve Concepts Model 4100

A spring loaded pallet on the pressure side of the vent allows the discharge of vapors to the atmosphere when the tank pressure exceeds the set point and a weight loaded/spring pallet on the vacuum side of the vent allows the intake of air when the tank vacuum exceeds the set point. The pallets open and close to regulate the tank pressure within permissible limits to avoid damage to the low pressure tank as the tank normally breathes due to thermal changes or product movement. Virtually eliminates the intake of air and the escape of vapors, except during normal tank breathing, thus reducing product loss

Construaction Housing Material: The Model 4100 vent is a rugged design made to last. Available in Aluminium, Carbon Steel or 316 SST.

Sizes - Connections. Available in Sizes 2" through 6". CS and SST vents have Raised Face Flange, Aluminium vents have Flat Face Flange to mate with standard ASME 150# flange connections.

Pallet Diaphragm Material: FEP TFE is Standard. Also available Buna-N, EPDM or Fluorocarbon Elastomer (FKM).

Key Features:

• The Model 4100 spring loaded end-of-line conservation vent is part of the Valve Concepts, Inc. modular vent product line. The Model 4100 can easily be field converted to a vacuum only vent, a pressure/vacuum vent with pipe away and can either be direct acting or pilot operated. Only Valve Concepts offer complete modularity throughout its complete vent product line.
  
  
• Maintains Accurate Settings. The minimum pressure setting is .5 oz./ in2 and the minimum vacuum setting is .5 oz./in2 . Maximum pressure setting is 15 psig and maximum vacuum setting is 15 psig. Lower settings may require weights instead of springs on the vacuum side. All vents are tested to Valve Concepts, Inc. high standards for both leakage and set point prior to shipment. A certified test certificate is included with each vent verifying the accuracy of both the pressure and vacuum setting and leakage. A leakage rate of less than 1 SCFH at 90% of set point is verified for both pressure and vacuum.
  
  
• Condensate Drainage. Self-draining housing body and drip rings keep condensate away from seating surfaces, preventing freezing, binding and clogging.
  
  
• Air-Cushioned Seating. Air-cushion seating provides tight sealing to reduce evaporation losses and the release of toxic vapors to the atmosphere, except under normal breathing conditions. The pallets have outer guiding and center stabilizing stem to provide self alignment and tight seating.