Length up to 12400mm (40’8”) x 2500mm (8’ 21/2”) wide. 4.6m Overall height including trailer. Deck heights designed to suit turntable height of prime mover
Heavy-duty aluminum headboard extrusion. 2x RHS climbing rails running complete length of crate both sides
Option: 3mm aluminum flat sheeting.
3mm crimped lyten sheet with 12mm round fixed grating across top of crimps. Crimps run across full width of trailer.
Option: 3mm crimped lyten sheet with drain full length of trailer. Drains thru to bottom deck of crate.
3mm crimped lyten sheet headboard fully welded on inside. Ladder up center
Option: ¾ thru load w/- slam shut gates and spring assisted full width flap – top & bottom decks. Chains are fitted to gates. Thru load gates sheeted w/- 3.0mm alum sheet or crimped style lyten sheeting (fully welded on inside only)
¾ thru load w/- slam shut gates & spring assisted full width flap – top and bottom decks
Option: ¾ sliding doors w/- thru load. Thru load gates sheeted w/- 3.0mm alum sheet or crimped steel lyten sheeting (fully welded on inside only)
Two pens per deck. Bottom pen – 1 x ¾ swinging slam shut door top pen – 2 x ½ swinging slam shut to side frame when open. Swinging gates sheeted w/- 3.0mm alum sheet or crimped steel lyten sheeting (fully welded on one side only).
Option: 2 X ½ swinging slam shut doors on bottom deck. 3 piece sliding doors top and bottom.
Timber catwalk full length of crate.
Option: Gridmesh catwalk
Full width 12’ ramp w/- single acting electric/ hydraulic power pack. Various options are available regarding positioning of ramp, powerpacks, remote controls, cylinders and the supply of batteries, solar panels, trickle feed etc.
All sideload doors are mounted with three heavy-duty hinges. Chains are fitted to doors
Option: Various options regarding the positioning, size and quantities of side load doors are available.
Lights (wired in conduit) conforming to all relevant Australian Design Rules. LED front and rear marker lamps.
Trailer is deburred and fully sandblasted prior to painting with 2 pak chemical resistant undercoat and PPG 2K finish coat to Fleet or custom colors (with scroll work to suit).
Option: Various finishes are available including metallics, clear-over-base and chemical resistant paints.