Designed to punch holes in steel studs at construction projects as well as housing and commercial installations, SP-100 Stud Punchers are capable of punching standard size holes of 25.4mm, 28mm and 32.2mm to meet Australian requirement for standard size bushes.
The SP-100 Stud Puncher was specifically designed by Stainelec for Blue Scope Steel "Truecore" framing systems at their research centre from steel framing systems,the SP-100 was chosen as it could punch the sections easily and to Australian standard hole sizes,being 25.4mm, 28mm and 32.2mm .
As each punched hole size requires bushing, it was important that the bushes and grommets were readily available from any electrical and plumbing wholesaler for Australian standard size hole penetrations in metal studs.
The SP-100 is also available for punch and die sets in 34mm diameter for international size bushes, with the hole-sizes accepting PVC bushes available from stockists of these size bushes.
Key Features of SP-100 Stud Punchers:
- Weighs only 2.3kg
- Can punch mild steel up to 1.2mm and tensile metal steel studs to 1mm in thicknesses
- Punch and die sets interchangeable for the four sizes available to SP-100
- Durable carry case for transporting between on-site and factory based applications
- P&Die sets available for Australian standard size bushes