The FLIR MR176 Imaging Moisture Meter Plus with IGM™ is an all-in-one tool equipped with a built-in thermal camera that can show you exactly where to measure moisture. Featuring Infrared Guided Measurement (IGM) technology, the MR176 helps you quickly scan and target moisture issues, visually guiding you to the spot where you can confidently take measurements and analyze readings. An integrated pinless sensor and an external pin probe provide the flexibility to take either non-intrusive or intrusive measurements. Coupled with a field-replaceable temperature and relative humidity sensor, and automatically calculated environmental readings, the MR176 delivers added convenience and ease of use, producing the right measurements — faster.
The FLIR MR176 Ranges:
Pin Moisture: 7 to 30% with ±1.5% accuracy
Pinless moisture: 0 to 100
Relative Humidity: 0 to 100% with 2.5% RH accuracy
Air Temperature: 32 to 122°F with ±1.1°F accuracy
Dew Point: -22 to 122°F with ±1.8°F accuracy
Vapor Pressure: 0.0 to 12.0 kPa with ±0.05 kPa accuracy
Mixing Ratio: 0 to 560 GPP with ±2 GPP accuracy
Special Promotion on this product is available.
Mention IndustrySearch and get 10% off
For more information or a quote please call or use the email for a direct reply.
OBIAT Electronics Pty Ltd | Test & Measurement Equipment
OBIAT Electronics has been established as an importer, distributor, wholesaler and retailer of quality Test and Measuring Instruments for over fifteen years.
Our competent staff collectively have over forty years of experience in electrical and electronic testing and are well qualified to offer the right advice and applications support for our customers equipment needs.
We provide service and calibration support and have a competent network of sub-distributors throughout Australia. If you have a requirement for Test and Measuring Instruments don't waste your time and money. Talk to us first and last!