Proxxon - Thicknesser | DH 40 Price Guide: $1,199 Get latest price

Thicknesser | DH 40

In Stock

Features of this product

• The (triple spindled) table is also made from die-cast aluminium, and machined to close tolerances. The zero-adjustable hand wheel allows adjustments to 0.1mm.
• Auto-feed is fitted as standard, as well as an anti-kickback device. The in feed roller is rifled and spring loaded to assist in feeding uneven materials, and the out feed roller is rubber coated to prevent marking the newly planed wood.
• The cutting block is fitted with two HSS blades, and the controls are dust-protected with a no-volt release.

Specifications of this product

We have various models and specifications in our range. These details are for the Thicknesser | DH 40. Get in touch to let us know your requirements so we can quote you on a product that best suits your needs.

• Cutter speed: 6,000rpm
• Maximum feed rate: 4.8m/min
• Maximum material width: 80mm
• Maximum material thickness: 40mm
• Minimum material thickness 3mm
• Table length: 232mm
• Maximum depth of cut: 0.8mm
• Maximum power consumption: 200W
• Die-cast aluminium table
• Mass: 8kg
• Dimensions: 280mm x 230mm x 235mm

To contact Hobby Tools Australia about Proxxon Thicknesser | DH 40 use Get a quote.

Features of this product

• The (triple spindled) table is also made from die-cast aluminium, and machined to close tolerances. The zero-adjustable hand wheel allows adjustments to 0.1mm.
• Auto-feed is fitted as standard, as well as an anti-kickback device. The in feed roller is rifled and spring loaded to assist in feeding uneven materials, and the out feed roller is rubber coated to prevent marking the newly planed wood.
• The cutting block is fitted with two HSS blades, and the controls are dust-protected with a no-volt release.

Specifications of this product

We have various models and specifications in our range. These details are for the Thicknesser | DH 40. Get in touch to let us know your requirements so we can quote you on a product that best suits your needs.

• Cutter speed: 6,000rpm
• Maximum feed rate: 4.8m/min
• Maximum material width: 80mm
• Maximum material thickness: 40mm
• Minimum material thickness 3mm
• Table length: 232mm
• Maximum depth of cut: 0.8mm
• Maximum power consumption: 200W
• Die-cast aluminium table
• Mass: 8kg
• Dimensions: 280mm x 230mm x 235mm

Read less...

To contact Hobby Tools Australia about Proxxon Thicknesser | DH 40 use Get a quote.