Leda - Thicknessers | 15" 1-phase Price Guide: $3,498 Get latest price

Specifications

• 381mm (15”) maximum working width.
• 165mm (6.5”) maximum working height.
• Driven serrated steel infeed roller in front of cutterhead.
• Driven smooth outfeed roller behind cutterhead with rubber surface.
• Anti-kick back device at infeed position.
• Two idle rollers in ground cast iron work table, directly below two driven feed rollers above.
• Two support rollers on front of work table and two at rear.
• Handwheel rise and fall of top section of machine on four round threaded columns, driven by chain below work table.
• Locking knob to hold table at required height.
• Measurement scale and pointer to set table height.
• Dust extraction chute on rear of machine of 100mm diameter.
• Push button switch with protruding stop button.

Technical Data

• Width of work table 381 mm
• Length of working table 653 mm
• Maximum depth of cut in one pass 3 mm
• Minimum length of unbutted workpiece 170 mm
• Two feed speeds by gear change 5 or 9 metres/min
• Cutterhead diameter 75 mm
• Rotation speed of cutterhead 5000 rpm
• Cutterhead and feed drive motor Single Phase 3hp
• Nett weight of machine 210 kgs

To contact Specialised Joinery Supplies about Leda Thicknessers | 15" 1-phase use Get a quote.

Specifications

• 381mm (15”) maximum working width.
• 165mm (6.5”) maximum working height.
• Driven serrated steel infeed roller in front of cutterhead.
• Driven smooth outfeed roller behind cutterhead with rubber surface.
• Anti-kick back device at infeed position.
• Two idle rollers in ground cast iron work table, directly below two driven feed rollers above.
• Two support rollers on front of work table and two at rear.
• Handwheel rise and fall of top section of machine on four round threaded columns, driven by chain below work table.
• Locking knob to hold table at required height.
• Measurement scale and pointer to set table height.
• Dust extraction chute on rear of machine of 100mm diameter.
• Push button switch with protruding stop button.

Technical Data

• Width of work table 381 mm
• Length of working table 653 mm
• Maximum depth of cut in one pass 3 mm
• Minimum length of unbutted workpiece 170 mm
• Two feed speeds by gear change 5 or 9 metres/min
• Cutterhead diameter 75 mm
• Rotation speed of cutterhead 5000 rpm
• Cutterhead and feed drive motor Single Phase 3hp
• Nett weight of machine 210 kgs

Read less...

To contact Specialised Joinery Supplies about Leda Thicknessers | 15" 1-phase use Get a quote.