Features of GNExCP6B Tool Rest Manual Call Points:
They are approved for Zone 1, 2, 21 and 22 hazardous areas for the control of fire and gas alarm systems.
All types are available with EOL or series resistors, diode or Zener diodes or an LED indicator and also with either single or double pole change over switches.
All versions are certified to ATEX and IECEx standards.
Specification: GNExCP6B: II 2G Ex e d mb IIC T4 Gb II 2D Ex t IIIC T80°C Db IP66 Ambient: Ta = -40°C to +50°C Ingress protection: IP66 Housing material: GRP - glass reinforced polyester (UV stable) Colour: RAL3000 Red (others available on request) Cable entries: 2 x M20 clearance top and 1 x M20 clearance side. Back box can be rotated to give 2 x bottom and 1 x side entries. Stopping plugs: 2 x Ex e nylon plugs as standard Brass and stainless steel plugs optional Terminals: 6 x 4.0mm² / 8 x 2.5mm²
Note: For applications that do not require monitoring resistors, diodes or inidcator LEDs please see the GNExCP6A-PT version.
Alternative housing colours are available to meet specific requirements
Single or double pole c/o switch
DIN rail mounted terminal blocks: 8 x 2.5mm²
Metalised polyester or stainless steel "Duty" label
Series and/or End of Line resistors, diodes and Zener diodes
Approvals: ATEX certificate: Sira 09ATEX3286X, IEC 60079-0:2007 Ed 5, EN 60079-1:2004, EN 60079-7:2007, IEC 60079-18:2009 Ed 3, EN 61241-1:2004 IECEx certificate: IECEx SIR 09.0121X, IEC 60079-0:2007-10 Edition: 5, IEC 60079-1:2003 Edition: 5, IEC 60079-18:2009 Edition: 3, IEC 60079-7:2006-07 Edition: 4, IEC 61241-1:2004 Edition: 1
ProDetec | Fire & Gas Detection; Spark & Hot Ember Detection
ProDetec represents Simtronics Fire & Gas (previously known as Simrad Optronics), Firefly, IRMACO Group (StuvEx, ISMA & Pagg). Water Mist Engineering (WME), ETech, Fireater, Groveley Detection and ...