The instrument can totalise up, provide the excitation power supply for the flow sensor, output the total in real time by Bluetooth to a tablet. A client acceptance signature can be written on the tablet screen and included with the email to show a proof of delivery.
Simple touch switch programming with English statement prompts on the instrument or configure from the Innovec Totaliser App
Quadrature input with reverse flow detection or single channel pulse train
Low cost - High performance
High contrast LCD display of 6 characters of 18 mm digit height
Applications include chemical dispensing from a tanker truck
Sensor supply that can be adjusted from 8 to 20VDC
Plug in screw terminal electrical connections
85 to 265VAC 47-63 Hz supply or factory fitted 12 to 40VDC supply
Bluetooth communication at 20 metres or 300 metres
ITS Totaliser is a 85 to 265VAC or 12-40VDC powered totaliser with batching capabilities for liquids that incorporates an six (6) digit 18mm LCD display
The instrument accepts quadrature input with reverse flow detection or single pulse train input from 0 to 2KHZ and is dip switch selectable for open collector, reed, Hall, Namur and turbine signals (from 20mV peak to peak)
The ITS incorporates a six (6) digit 18mm high segmented LCD display with white LED backlight with a wide viewing angle and a viewing distance of 5 metres.
The instrument incorporates a foreground total, background total and rate display that is stored in EEPROM memory during loss of power. These values can be displayed by the front total touch button of the App.
Low Flow Alarm
The instrument incorporates a low flow alarm. If no input pulses are received in a user programmed period the low flow output is activated and LF ERR (Low Flow Error) is displayed.
0 to 70°C
0-90% RH NON condensing
Front facia is weatherproof to IP65
Terminal 1:Input Common (-)
Terminal 11:End of batch open collector output
Terminal 2:Input one minus
Terminal 12:Not used
Terminal 3:Input one plus
Terminal 13:Relay one normally open contact
Terminal 4: Input two minus
Terminal 14:Relay one common contact
Terminal 5: Input two plus
Terminal 15:Relay two normally open contact
Terminal 6: 8 - 24VDC sensor supply
Terminal 16 Relay two common contact
Terminal 17: Ground Supply
Terminal 8: Not used
Terminal 18: 85 to 265VAC/24VDC active supply
Terminal 9:Open collector pulse output per litre
Terminal 19: VAC neutral or 0VDC supply (-)
Terminal 10:Low flow alarm OC output
Terminal 20: Not used
85 to 265VAC of 47-63 Hz or DC to DC converter isolator from 12 to 40VDC. An adjustable transducer power supply of 8 to 24VDC at 30mA is incorporated in the instrument.
Surface mounting IP65 polycarbonate enclosure of case dimensions 130mm long x 80mm high by 75mm deep with fixing centres of 120mm wide by 60mm high.
The ITS Totaliser is user friendly to operate. The K factor, decimal points and set point are configured from the front panel or from the tablet. Pressing the start button will energise output relay one and start liquid flow. The display total will increment in value or display flow rate. When the set point is reached the relay is de-energised, stopping flow. A new screen is displayed on the tablet that allows an email to be sent for proof of delivery.
Mechanical relay standard with form C contacts and a contact rating of amperes resistive at 240VAC
Solid state relays optional with a normally open contact and a contact rating of 2 amperes at 240VAC
Sample Number: ITS/INC/0-999999.9/24VDC.
Innovec Controls | Process Instrumentation IndustrySearch Trusted Supplier
Innovec Controls is Solutions That Work. We can offer products that will do what you want, when you want.
Whether it be counting bottles on a production line, flow measurement, a fuel gauge or a fuel interlock on a CNG Vehicle, LED lighting for trains & trams, we can supply.
We also solve unusual applications by Bespoke design to your specific requirements.
We manufacture in Australia and supply quality and reliable instrumentation to the world market.