Tube Cleaning Tools | TubeMaster 1400-20/S
- Max. 1400 bar operating pressure
- 20 metres HP-hose DN 12
- 3 metres guiding hose
- DN 50 Hose guide
The driving unit consisting of air motor, steplessly adjustable gear, coupling and rotating lead through which produces the rotating of the high pressure hose and therefore an efficient cleaning of pipes is achieved.
The hose feeding unit serves to feed the hose into the tube to be cleaned. A torque lock serves to the turning of the pressureless hose and a strain relief device is added to increase the operational safety.
The guiding hose and the hose guide are included in the assembly group PN 001.1067.6. For safety reasons only the hose type DN12-HST4G-SR2 is to be used and thus the tube cleaning can only be done by using the following components: driving unit, hose feeding unit and hose with nozzle attached.
If there is no sufficient space between driving unit and pipe to be cleaned allowing the total length of the HP- hose to be laid out straight, the hose must be laid out as shown on drawing to avoid loops