Home Trusted by 500,000+ buyers

Two Wire Braid | Diehard AS2D

Supplier: Ryco Hydraulics

Meets or exceeds the performance requirements of SAE 100R2A, AS 3791 100R2A, DIN 20022-2ST, EN 853 Type 2ST, ISO 1436 Type 2A.

Price Guide: POA

Recommended For:
High pressure hydraulic oil lines.

Black, oil resistant synthetic rubber. (Nitrile).

Two braids of high tensile steel wire.

Black, extra abrasion resistant and oil resistant synthetic rubber.
Skiving of cover is required with Bitelok T200 & T700 Series Crimp Couplings and B Series Field Attachable Couplings.
The maximum weight loss of the cover under ISO 6945 method of test for abrasion resistance is less than 10% (less than 0.10 gms) of that allowed by DIN 20022-2ST and
EN 853 Type 2ST .

Temperature Range:
From -40°C to +100°C (-40°F to +212°F).
For water oil emulsions. click here

Working Pressure:
Dynamic working pressures (in systems with pressure surges or variable loads) are based on 4:1 minimum burst to working pressure safety factor.
Static working pressures (in systems with constant loads without pressure spikes) are based on 3:1 minimum burst to working pressure safety factor.

Flame Resistance:
Complies with Flame Resistant and Electrical Resistance (Anti-Static) requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B and 13A.
Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.