"Type A" Portable Stock Oilers
"Type A" Portable stock oilers offer a simple, cost-effective solution to stock lubrication.
The top roll is fed by lubricant held in an overhead reservoir and dripped from a perforated tube. The bottom roll picks up lubricant from the lower pan. Stock passes between the upper and lower rollers. Rolls turn on a free-wheeling steel axle rod ensuring even spread of lubricant. Constant spring pressure on rolls assures smooth, uniform lubrication. Reservoir capacity is 1 quart. An optional larger Reservoir is available, and rolls are available in Light/Medium duty and Heavy duty varieties.
The A9 (9") and A18 (18") standard models are shown below. Larger sizes are available by special order.
A-9 Stock Oiler:
A-18 Stock Oiler:
An optional FLOOR STAND is available for "Type A" Stock Oilers. Feed-line
height is adjustable from 24 inches to 42 inches. The heavy 14-lb base plate is large enough to sit a 5-gallon bucket on, for extra weight in extreme situations.
Strip C'lip
These miniature Stock Oilers are designed to lubricate light gauge and narrow materials, from small diameter wire to 4-inch wide coil material. There are two types available:
Need more information? Message GW Technologies via the form, or call and say you found them on IndustrySearch so they can best assist you.
"Type A" Portable stock oilers offer a simple, cost-effective solution to stock lubrication.
The top roll is fed by lubricant held in an overhead reservoir and dripped from a perforated tube. The bottom roll picks up lubricant from the lower pan. Stock passes between the upper and lower rollers. Rolls turn on a free-wheeling steel axle rod ensuring even spread of lubricant. Constant spring pressure on rolls assures smooth, uniform lubrication. Reservoir capacity is 1 quart. An optional larger Reservoir is available, and rolls are available in Light/Medium duty and Heavy duty varieties.
The A9 (9") and A18 (18") standard models are shown below. Larger sizes are available by special order.
A-9 Stock Oiler:
A-18 Stock Oiler:
An optional FLOOR STAND is available for "Type A" Stock Oilers. Feed-line
height is adjustable from 24 inches to 42 inches. The heavy 14-lb base plate is large enough to sit a 5-gallon bucket on, for extra weight in extreme situations.
Strip C'lip
These miniature Stock Oilers are designed to lubricate light gauge and narrow materials, from small diameter wire to 4-inch wide coil material. There are two types available:
Need more information? Message GW Technologies via the form, or call and say you found them on IndustrySearch so they can best assist you.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product