This production line recycles copper and aluminum radiators disassembled from air conditioners and generators, and sorts out copper, iron and aluminum. The material is first coarsely crushed by a broken machine, then finely crushed by two broken machines, pulverized into materials of about 3CM lengt
This production line recycles copper and aluminum radiators disassembled from air conditioners and generators, and sorts out copper, iron and aluminum. The material is first coarsely crushed by a broken machine, then finely crushed by two broken machines, pulverized into materials of about 3CM length, separated by iron separation, and then separated by two specific gravity sorting, and copper and aluminum are sorted.
1. The production line is developed by our company for many years. Our processing process has lower metal loss than the processing technology of European and American countries. It minimizes the number of times the material is broken, ensures the material is separated under the maximum state, and reduces the metal powder. Produce and improve recycling efficiency.
2. A broken machine adopts two-axis roller design, which has low noise, large torque and can break a large volume of radiator.
3. A broken machine tool is made of alloy tool steel, which is made by special process and has a design service life of about one year.
4. Using the two-pole specific gravity sorting, the sorting precision is improved, and the purity of copper, aluminum and iron sorted is >99%.
5. The treatment process is closed and equipped with a dust collection system to effectively control dust spillage.
First, the warranty period and scope
1. Warranty period: 12 months from the date of acceptance of the equipment (except for wear parts).
2. Warranty: During the warranty period, if the equipment fails and is damaged due to quality problems, the supplier will replace the parts or repair without compensation. Due to improper operation of the buyer or foreign matter entering, failures and other losses caused by non-quality reasons such as self-disassembly are not covered by the above warranty. During the warranty period, the equipment has an irreparable fault condition, and the seller unconditionally replaces the new parts or equipment. Wear parts are repaired or replaced according to actual use.
Second, after sales service:
After receiving the buyer's failure notice, the after-sales personnel communicated by telephone within 15 minutes, and the telephone communication could not be resolved within 2 hours. A professional repairman was dispatched to the scene for repair within 36 hours. (only for domestic)
Enerpat Group UK | Scrap Metal Baler, Shredder, Horizontal Baler
UK Largest Waste dispose Equipment Manufacturer/Vendor
Enerpat machinery manufactures balers for the waste recycling Industry. The UK Famous Brand known as Enerpat has over 78 years experience ...