WOMA - Ultra-High Pressure Pumps | M-Series ...

Get Callback

Call

WOMA - Ultra-High Pressure Pumps | M-Series

Supplier: WOMA Australia

In Stock

Compare

Ultra-High Pressure Pumps | M-Series

Our M-series high-pressure plunger pumps feature our patented HCV® valve technology and have mastered operating pressures up to 58000 psi/4000 bar.

They are ideally suited for cutting and demolition projects as well as for stripping coatings and derusting.

Being slow-speed pumps, their operation is low-wear, resulting in long life and longer operation between maintenance cycles. An auxiliary drive shaft makes it possible to double the output when required, by adding another pump to the drive train. The modular design allows you the flexibility to change the output power specifications by simply replacing an interchangeable plunger conversion set.
The M-series has gearbox cooling and satisfies both the ATEX as well as API standard*. Not least of all, this pump series can operate at suction flow temperatures up to 65°C, and if required even up
to 90°C**.

Key Features:

Basics

Two height levels of the drive shaft by repositioning the pump
Good accessibility in any assembly situation
Very long life

Gear Box

Proven industrial gear box with pressurized oil lubrication and 3 available gear ratios (WOMA® standard)

Pump Head

Stress-free pump head in central valve design
High volumetric efficiency due to minimal dead space

Interchangeable Plunger Set

Armoured cylinder
Interchangeable plunger set system, equipped with hard metal plungers and dynamic sealing system
Newly developed, static metal seals in the zone of dynamic stress
Low-pulsation operation thanks to optimised valve kinematics
Maintenance-friendly

HCV®-Technology

Hydrostatically Compensated Valves

The unique, patented central valve design
Extremely long life
Absorption of very high stresses
High fatigue
Minimal maintenance costs

Additional Equipment

Pneumatically operated 2/2-way directional bypass valve
Check valve for 3/2-way directional functions

Special Model

Pump head, interchangeable plunger set and valves in special materials for aggressive media being pumped, e.g. sea water
Water temperature above 65°C

Directives and Standards

ATEX 94/9/EC
API 674 (pressure and volume flow-dependent)
Quality management system according to DIN ISO EN 9001

Need more information? Message WOMA Australia via the form, or call and say you found them on IndustrySearch so they can best assist you.

They are ideally suited for cutting and demolition projects as well as for stripping coatings and derusting.

Key Features:

Basics

Two height levels of the drive shaft by repositioning the pump
Good accessibility in any assembly situation
Very long life

Gear Box

Proven industrial gear box with pressurized oil lubrication and 3 available gear ratios (WOMA® standard)

Pump Head

Stress-free pump head in central valve design
High volumetric efficiency due to minimal dead space

Interchangeable Plunger Set

Armoured cylinder
Interchangeable plunger set system, equipped with hard metal plungers and dynamic sealing system
Newly developed, static metal seals in the zone of dynamic stress
Low-pulsation operation thanks to optimised valve kinematics
Maintenance-friendly

HCV®-Technology

Hydrostatically Compensated Valves

The unique, patented central valve design
Extremely long life
Absorption of very high stresses
High fatigue
Minimal maintenance costs

Additional Equipment

Pneumatically operated 2/2-way directional bypass valve
Check valve for 3/2-way directional functions

Special Model

Pump head, interchangeable plunger set and valves in special materials for aggressive media being pumped, e.g. sea water
Water temperature above 65°C

Directives and Standards

ATEX 94/9/EC
API 674 (pressure and volume flow-dependent)
Quality management system according to DIN ISO EN 9001

Read less...

Need more information? Message WOMA Australia via the form, or call and say you found them on IndustrySearch so they can best assist you.

WOMA_Ultra-High Pressure Pumps M-Series_Brochure(0.40MB)

Supplier

WOMA Australia

Call (08) 9434 66..

Get a Callback from an expert

Location: Henderson, WA

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. WOMA Australia are also proudly displaying these credentials:

Location:

Henderson , WA

Joined:

Oct 2020

Level:

Standard Storefront

Verified:

Report this product

Contact this supplier