VBOX 3i 100Hz
The VBOX 3i is the pinnacle of the VBOX range. A very powerful processor ensures low latency with updates of speed, position and acceleration, 100 times a second. In addition, there are four high resolution analogue inputs and 32 channels of external CAN.
A variety of Racelogic input modules are compatible with this product. The VBOX 3i has Bluetooth, USB and Serial connectivity and all data is logged to a compact flash card. A supplied microphone allows simultaneous voice tagging alongside the GPS data. By connecting the VBOX 3i to the Racelogic Inertial Measurement Unit, a real time Kalman Filter will correct the GPS in areas of poor GPS reception, and will output Pitch, Roll and Yaw values at 100Hz. The VBOX3i can be used in conjunction with a Base Station to get 40cm as standard, or 2cm with the RTK option.
VBOX IISX – Triple Antenna (SL3)
The Triple Antenna version of the VBOX IISX has all of the same features as the single and dual antenna versions, but contains three GPS engines. By utilising all of three GPS engines configured in a ‘fixed baseline RTK setup’, extra parameters can be measured which are not normally available from a single point GPS setup.These parameters include Slip angle, Pitch angle and Roll angle, all measured simultaneously.
Available with an update rate of 20, 10 or 5 times a second, the VBOX IISX features a built in display, SD card logging, high speed brake trigger input, CAN interface and two sets of analogue and digital outputs. Connection to a PC is made via a USB or serial interface.
For any further information please don’t hesitate to contact our experienced team at Applied Measurement Australia Pty Ltd.