Australia's #1 industrial directory for equipment & suppliers

Vertical Smoke Curtains

Supplier: Coopers Fire

SmokeStop is a concealed, active smoke curtain containment system designed to descend at a safe speed either under power; or gravity in the event of a total power failure or cabling corruption.

CONTACT THIS SUPPLIER TO FIND OUT MORE

SmokeStop Vertical Smoke Curtains

SmokeStop is a concealed, active smoke curtain containment system designed to descend at a safe speed either under power; or gravity in the event of a total power failure or cabling corruption. Even barriers hundreds of metres wide and up to 12 metres deep, cannot crash down and endanger occupants.

Coopers systems are tested in full compliance with BS EN12101-1:2006 and are classified to ASB 1 & 3 with a DA fire resistance (150 mins). These products meet the requirements of the Construction Products Directive (Directive 89/106/EEC) for CE Marking, Mandate M/109 to this product standard.

The system is extensively tested and accepted by many overseas authorities to meet BS746: Part 3: 1990, with 60 minutes FR It meets the Class 0 requirements of England and Wales Building Regulations 1991, the requirement for Fire Propagation of BS476 Part 6, 1989 and has Nil Spread of Flame, achieving Class 1 according to BS476 Part 7, 1997.

Delayed & split drop deployment controls offer safe escape as well as controls ‘gravity failsafe’ or auto retract, to fully addressable local or remote monitoring systems, enabling easy integration with a dedicated fire and smoke alarm system.

  • 'Gravity Failsafe' drive system allows curtains to safely descend under gravity at controlled speeds - even in the event of total power failure.
  • Fully adjustable speed controls
  • Inclusion of side containment channels (if required)
  • System synchronisation and handshaking
  • A variety of ceiling interfaces including corners, curves and circular
  • 24V operation with battery backup

Curtain

The EFP 1/1000 is a composite material of stainless steel mesh and woven glass fibre, coated in a specially developed reflective aluminium enriched polymer. Tested in accordance with BS EN12101-1, BS EN1634-3, BS 7346-3 & BS 476 Parts 6 & 7.

Bottom Rail

A triangular section bottom rail is attached to the curtain to assist downwards movement; When in the stored position the smoke curtain's bottom bar creates a slimline soffit, with no visible fixings for a clean, uncluttered appearance.

Roller

The smoke curtain fabric winds onto a tubular 70mm, 80mm or 100mm barrel of mild steel tube of sufficient diameter and wall thickness to resist deflection - mounted on endplate bearings.

Casing

Casings are manufactured from galvanised steel and are available in a range of sizes to fit various opening heights and widths. The barrel and curtain assembly is housed within the casing, and may be soffit or face fixed to the structure - either directly or by means of drop rods allowing services to be routed above.

Finish

Guides, bottom rail and casings are supplied in a standard finish of galvanised steel, but are also available polyester powder coated in a range of standard RAL colours at additional cost.

  • Instant quotations using either Coopers or third party engineers
  • Tested in accordance with BS EN12101-1, BS 7346-3 and BS 476 Parts 6 & 7

To Know More about Vertical Smoke Curtains Please click here

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more