The VS Centrifugal Solid-liquid Separator separates precipitant particles from liquids by centrifugal force in a high speed spinning liquid. The separation efficiency of VS Separator depends on the particle density and the liquid viscosity. Larger density of particles and lower viscosity of liquid, it will perform higher separation efficiency. For high density particles larger than 40μm, its separation efficiency can exceed 98%. VS Separator can separate solid particles as small as 5μm. When separating, VS Separator has no moving parts and no filter elements It can keep running without maintenance. The high efficiency, consistent performance and economic running cost make it an ideal solution for solid-liquid separation process.
Applicable Liquid: Water and low viscous liquids (1 - 40 cps)
Flow Rate: 7 - 432 m³/h
Standard Design Pressure: 1.0 Mpa / 1.6 Mpa
Design Temperature: 0 - 200°C (determined by the seal material)
Pressure Drop: 0.02 - 0.07 MPa
Housing Wet Part Material: 304 / 316L / CS
Inlet and Outlet Standard Flange: DN25 - DN250 HG20592-2009 (DIN compatible), HG20615-2009 (ANSI B16.5 Compatible), AS2129 Table Flange
Discharging Valve: Pneumatic ball valve, protection class IP65
Supply Facility Requirement: 380V AC, 0.4-0.6 Mpa clean and dry compressed air
Applicable Industry: Water treatment, plup and paper, petrochemical, metal processing, chemical and biological pharmaceuticals etc.
Applicable Fluids: Raw water (river water, seawater, reservoir water, groundwater), sewage treatment, circulating water, machine coolants, cleaning agents etc.
In a heat exchangers system
VS can protect the system against fouling
VS maintains design efficiencies for better heat transfer rates
VS reduces maintenance frequency for heat exchanger equipment
VS removes suspended grit and scale
In a cooling system
VS minimizes accumulation of solids that typically settle in sumps and basins.
VS reduces the frequency of shutdowns
VS reduces solids build-up and decreases clean out time
VS avoids solids-induced microbial growth and decreases chemical use and increases process liquid life
In a general industrial process
VS as a pre-filter protects finer filtration, reduces replacement of downstream filter elements/media
VS concentrates solids for easy disposal or allows for recovery of high value solids and minimizes liquid loss.
VS extends the life of pump seals, valves, and process equipment
VS reduces disposal cost
VS minimizes labor, maintenance and consumables costs
We’re innovators of high standards, using cutting-edge technologies to lead the industry forward. At AU-LIVIC Filtration we are committed to creating the most suitable filtration solutions for your business, with the consistent care, service and quality that you truly deserve and consistent outstanding services. As a leading filtration solution designer and equipment provider with combined with over 10 years of industrial filtration experience, we specialise in customised self-cleaning filtration system/solution design and manufacture as well as conventional cartridge/bag filters, basket filters, hydraulic filters, and a wide range of filter elements and spare parts. Our solutions and equipment are capable of helping our clients to achieve high-efficiency process with minimum labour and maintenance cost and reduced products cycle. We serve industries such as petrochemicals, fine chemical, water treatment, auto industry, marine, food and beverage, metalworking, etc.