Home Trusted by 500,000+ buyers
BACK Main Directory > Safety Equipment & Workwear > Water Based Anti-Slip Coating Polymer | SUPA SAFE

Water Based Anti-Slip Coating Polymer | SUPA SAFE

Supplier: Global Safe Technologies

SUPA SAFE is a proven water based environment friendly, super fast curing polymer anti-slip protective coating.

Price Guide: POA

SUPA SAFE Water Based Anti-Slip Coating Polymer advantages:                                                                

  • Single pack – no mixing required 
  • Excellent adhesion
  • Super fast curing – tack free 1 to 2 hours, solid cure (useable) 4 to 6 hours, full cure   24 to 36 hours
  • Tough, durable and semi-flexible 
  • Abrasion resistant
  • Environment friendly, odourless
  • Suitable indoor and outdoor
  • Suitable to light to heavy traffic
  • Very well suited for situations with strong time constraint
  • Suitable for a great variety of substrates
  • Easily over-coated and repaired
  • Attractive, wide range of colours
  • Flexibility with crack bridging ability
  • Extremely good colour fastness    


  • SUPA SAFE is suitable as non slip protective coating for a great variety of environments like domestic and recreational, schools, parks and public areas, hospitality, mining, building and construction, car park decks, industrial areas, marine, agriculture and farming, automotive, rail, aged and health care and shopping centres.   
  • Anti-slip Rating as an indication of the products excellent slip resistance and wearing properties, the slip resistance rating of SUPA SAFE has been independently tested according to AS /NZ4586:2004 Appendix A (Wet Pendulum Test) and achieved a BPN of up to 61 Class V.

Note: The manner in which the product is applied will effect its anti-slip rating and may produce a lower result. An accelerated wear test of 5000 cycles equating to approximately 2 years plus of average wear the product's slip rating was reduced by only 7 BPN, to a BPN of 54 Class W.

Please note that the product is only available on a supply and install basis.


  • Super fast curing time requires at least 20 degree celsius and 50% humidity
  • Areas of a build up of fatty or greasy substances and grime will diminish or negate the product's effectiveness and before application a trial is always recommended for in these areas
  • To maintain the anti-slip properties, it is essential that the product be keep free and clean of dirt build-up and chemicals spills must be immediately cleaned
  • May not be suitable in areas subject to corrosive chemicals

For more information or a qoute on Supa-Safe Water Based Anti-Slip Coating Polymer please call or use the IndustrySearch email for a direct reply.