Water hammer and pressure transients caused by pumps and valves strain pipes and are often responsible for pipe bursts. With the help of a pressure transient logger you can identify water hammer and pressure transients in your water network.
The NEWLOG 4DR - Pressure Transient Logger provides a smart solution to the extensive data collected by a pressure transient logger or water hammer logger. The Pressure Transient logger can be programmed to record pressure levels at up to 10HZ and then store either the actual value or log the min, max, mean and deviation for a nominated period, typically 5 minutes. Logging the data on this pressure transient logger in this way enables you to record about 5 weeks of data.
Battery Life: 5 Years
Memory Capacity: 64,000 Readings
Sample Rate: 0.1 Second to 1 hour
Single Sample (17 hours at 1s intervals or 100 minutes at 0.1s intervals)
Statistical Mode (55 days at 5 min logging storing the min, max, mean & deviation with 0.1s samples)
Dimensions: 90mm x 165mm x 67mm
Weight: 700 grams
Accuracy: 0.25% of Range
Transducer Range: 0 - 100 Metres
Water Ingress Protection : IP67
Applications of NEWLOG 4DR - Pressure Transient Logger
Pressure Transient Logger
Water Hammer Logger
Gutermann | Water Leak Detection & Data Loggers
Gutermann are specialists in all aspects of waterloss. We have the most advanced equipment for all aspects of network monitoring and water leak detection from initial assessment of pressure and flow in ...