Setco Australia have designed a 6-25 tonne brake capacity, liquid cooled, spring applied, hydraulic release brake.
CONTACT THIS SUPPLIER TO FIND OUT MORE
Features and benefits
Capacity to 25,000 kg at 20 km/h per wheel hub.
Bearing L10 life in excess of 2,500 hours (wheel centre dependent). High capacity bearings and shaft fitted.
Spring applied / hydraulic release operation. Brake application begins at 1100 PSI and the brake is fully applied at 0 PSI.
Brakes work directly from EJC130, 913 (new series) and ST3.5 without additional valving. Other tow LHD's fitted with Hydraulic Applied Brakes (HAB) service can couple to the brake via the optional Setco Universal Brake Coupling Valve.
Brake torque can be altered by removing or adding brake plates.
Brakes comply with trailer braking requirements of MDG1-1995.
Heavy duty, duo cone seals with mechanical protection.
Brake wear indicator fitted.
Mechanical brake release fitted for emergency towing only.
Mineral oil compatible.
Oil fill, oil level check and brake release can all be performed from outside of the hub.
Hub stub size and pattern can be altered to suit particular requirements.
Compact design: Ideal match with Setco low profile high capacity wheel assemblies.