WIA - Portable Mig Welder | Weldmatic 200i

Portable Mig Welder | Weldmatic 200i

Applications

• Rural Workshops
• Onsite Maintenance
• Light Fabrication

 

Versatile, Portable, Multi-Process Inverter with VRD
Single phase, multi-process inverter capable of handling MIG, Stick and Lift-TIG processes. With 200A of MIG, 170A of Stick and 200A of Lift-Arc capability, the Weldmatic 200i suits a wide range of applications - from fencing jobs to construction sites.

VRD
Built in VRD delivers added safety when operating in Stick or Lift-TIG mode and meets the requirements of site work. Fully compliant to Australian Standards AS 60974.1 & AS1674.2 CAT C.

Portable
At only 13kg, the Weldmatic 200i is lightweight and portable, making it suitable for onsite maintenance.

Gas or Gasless
Suits gas shielded and gasless flux cored wires. Suits 5kg spool.

Quick & Easy Gun Cable Assembly
Supplied with a tradesman quality gun and cable complete with euro connector for easy fitting and removal.

Easy Set-up & Adjustment
The control panel allows easy selection for gas and wire type, with infinitely variable Voltage and wire speed, indicated on the digital display. A suggested setting chart allows the Weldmatic 200i to be setup quickly and easily.

Built in Operator Safety
The power source features a built-in thermal protection device that will activate if the machine is operated beyond its safe thermal operating zone.

Warranty*
With a 2 year unlimited warranty, covering parts and labour, and supported by an Australia wide service network, you can be guaranteed you’re buying reliability and performance.

*Power source only.

Generators*
Generators used to power this equipment must have a minimum capacity of 10kW continuous.

Due to variation between generators by different manufacturers, it is impossible for WIA to validate operation from all generators. Therefore, WIA recommend that operation of equipment on the generator is confirmed before purchasing either welder or the generator.

 

Technical Specifications

Primary Voltage	Rated Primary Current	Max. Primary Current	Recommended Generator kVa	Supply Plug	Rated Output @ 40C (10min)	Welding Current Range	Wire Size Range (mm)	Shipping Weight	Machine Weight
240 Vac - 50/60 Hz	14 Amps	36 Amps	10 kVA	15 Amps	200 Amps @ 24.5 Volts 15% 77 Amps @ 17.9 Volts 100%	30 - 200 Amps	0.6 - 0.9 solid 0.8 - 1.2 cored 1.0 aluminium	20kg	13kg

Read more...

To contact Welding Industries of Australia about WIA Portable Mig Welder | Weldmatic 200i use Get A Quote.

Applications

• Rural Workshops
• Onsite Maintenance
• Light Fabrication

 

Versatile, Portable, Multi-Process Inverter with VRD
Single phase, multi-process inverter capable of handling MIG, Stick and Lift-TIG processes. With 200A of MIG, 170A of Stick and 200A of Lift-Arc capability, the Weldmatic 200i suits a wide range of applications - from fencing jobs to construction sites.

VRD
Built in VRD delivers added safety when operating in Stick or Lift-TIG mode and meets the requirements of site work. Fully compliant to Australian Standards AS 60974.1 & AS1674.2 CAT C.

Portable
At only 13kg, the Weldmatic 200i is lightweight and portable, making it suitable for onsite maintenance.

Gas or Gasless
Suits gas shielded and gasless flux cored wires. Suits 5kg spool.

Quick & Easy Gun Cable Assembly
Supplied with a tradesman quality gun and cable complete with euro connector for easy fitting and removal.

Easy Set-up & Adjustment
The control panel allows easy selection for gas and wire type, with infinitely variable Voltage and wire speed, indicated on the digital display. A suggested setting chart allows the Weldmatic 200i to be setup quickly and easily.

Built in Operator Safety
The power source features a built-in thermal protection device that will activate if the machine is operated beyond its safe thermal operating zone.

Warranty*
With a 2 year unlimited warranty, covering parts and labour, and supported by an Australia wide service network, you can be guaranteed you’re buying reliability and performance.

*Power source only.

Generators*
Generators used to power this equipment must have a minimum capacity of 10kW continuous.

Due to variation between generators by different manufacturers, it is impossible for WIA to validate operation from all generators. Therefore, WIA recommend that operation of equipment on the generator is confirmed before purchasing either welder or the generator.

 

Technical Specifications

Primary Voltage	Rated Primary Current	Max. Primary Current	Recommended Generator kVa	Supply Plug	Rated Output @ 40C (10min)	Welding Current Range	Wire Size Range (mm)	Shipping Weight	Machine Weight
240 Vac - 50/60 Hz	14 Amps	36 Amps	10 kVA	15 Amps	200 Amps @ 24.5 Volts 15% 77 Amps @ 17.9 Volts 100%	30 - 200 Amps	0.6 - 0.9 solid 0.8 - 1.2 cored 1.0 aluminium	20kg	13kg

Read less...

To contact Welding Industries of Australia about WIA Portable Mig Welder | Weldmatic 200i use Get A Quote.

Spec Sheet(0.60MB)