HYDREX MV provides excellent operating and maintenance benefits for increased productivity. HYDREX MV takes your equipment to higher levels of wide temperature performance. HYDREX MV hydraulic fluids start with the HT purity process to produce 99.9% pure, crystal clear base oils.
By removing the impurities that can hinder the performance of competitive conventional oils, and blending in our specialty additives, HYDREX MV retains its ‘fresh oil’ properties longer providing resistance to oxidative breakdown and outstanding wear protection in wide temperature ranges.
Features and Benefits:
Seasonal use under wide temperature ranges
Increased equipment precision and responsiveness
Better protection from wear in low and high temperatures
Reduced inventory for greater operational efficiencies and less chance of misapplication
Outstanding oxidation and thermal stability
Longer oil life which helps extend drain intervals for reduced change-out costs and less reservoir exposure to external contaminants
Decreases varnish build up that can interfere with servo and directional valve operation
Minimises harmful sludge build up in the reservoir that can lead to shortened oil life and equipment wear
Exceptional anti-wear protection
Extends equipment life
Reduces maintenance and mechanical failure
Protects equipment being driven longer, harder and faster in tougher conditions
Improves operating reliability over a wide range of pressures
Improved rust and corrosion prevention
Iron and other metal components are protected against water damage
Excellent water separability and hydrolytic stability allows oil to be reused
Oil separates readily from water without loss of performance additives
Improved foam and air entrainment performance
Prevents overflowing of reservoirs
Eliminates "sponginess" from hydraulic systems and prevents pump cavitation
High after shear VI to maintain optimal viscosity at operating temperatures
Increased pump efficiency in outdoor applications
Lower diesel fuel consumption for same amount of work, or increased equipment productivity
Less C02 emissions
Petro-Canada's HYDREX MV hydraulic fluids are recommended for wide temperature use in piston, gear and vane hydraulic pumps found on industrial machinery and mobile equipment. HYDREX MV offers minimal fluid friction at low start-up temperatures and provides the correct viscosity at high operating temperatures.
HYDREX MV may be used in systems equipped with fine filters down to 3 microns without loss of additives or filter plugging. HYDREX MV hydraulic fluids are approved for use in equipment manufactured by Bosch-Rexroth and are recommended for use in equipment manufactured by Eaton Vickers, Denison, Komatsu, Sauer-Danfoss, Oilgear, Hydreco, Dynex and others.
HYDREX MV fluids meet the following manufacturers' specifications:
Eaton Vickers M-2950-S and I-286-S
Komatsu (MV 36) HYDREX MV is suitable for use where the following specifications are required:
ISO 6743/4 Type HV
DIN 51524 Part 3 HVLP (MV 22 & 36)
DIN 51524 Part 2 HLP (MV 60)
JCMA HK-1 (MV 36) HYDREX MV fluids are classified as NSF International H2, and HYDREX MV 36 is classified as CFIA Type N2
Imperial Oil & Chemical | Oil, Lubricant & Chemical Products
Imperial Oil & Chemical are a leading independent distributor of some of the Worlds best brands of oil, lubricant and chemical products. Combined with over 40 years experience with supplying to Industrial, ...