The Hallite 33 wiper has a lip designed to remove lightly adhered dirt from the rod i.e. mud, dust or moisture.
The wiper is manufactured from a hard nitrile rubber suitable for installing in a grooved housing. Rod diameters of 20mm and below require a two piece housing .
To prevent dirt passing the outside of the wiper and to reduce the pumping action, the outside diameter is an interference fit with the housing.
Certain sizes of the standard Hallite 33 metric range are suitable for ISO 6195 Housing Type A.
It should also be noted that the Hallite 33 inch profile differs from the metric profile.
- General purpose wiper
- Wide size ranges
- Effective seal on housing as well as rod
- Hallite wipers 33 are produced in materials that are capable of operating at temperatures below 0°C, but they are not designed to scrape ice.
- Additional wiper seals are available on request and include ranges for standard American grooves.
To Know More about Wipers Please click here