Australia's #1 industrial directory for equipment & suppliers

Wire Forms and Product Assembly

Supplier: Bee Engineering (Aus)

Wire Forms and Product Assembly includes assembly of components to mating parts, whether it is a combination of parts supplied by us, our customer, or other specialty manufacturers

CONTACT THIS SUPPLIER TO FIND OUT MORE

Wire Forms and Product Assembly

Production of Wire Forms

We have a wide range of options to supply you with your finished product as below Prototypes or breakdown requirements. These requirements shall be produced in a product development area; this area is completely set up for product development and breakdown requirements. The production volume for this area ranges between 1 to 50 parts as required.

Low to high volume production requirements

The production Cnc Wire Forming equipment can produce an infinite variety of shapes, sizes and configurations for a large variety of applications. This equipment produces the parts directly from volume coil material and fabricates it accurately into parts at high production speeds; this also reduces the manual handling of products which shall reduce the overall cost of production.

Wire Diameter

In the production of wire forms we have the ability to supply a large range of products that fall within the standard wire sizes range which shall start at .25mm and go all the way up to 13mm in material thickness, the supply of these products shall relate to the material stock level at the time of order placement.

Material Type

The most common materials used in the production of springs are spring steels they come in a range of grades all depending on your product requirements, this shall be looked into further after reviewing your drawing or sample provided.

Other material types

Hard Drawn Low Carbon, Stainless steel grades 304 and 316 shall be stock lines and other grades shall be sourced if required. We also have a large range of other material types available, if your material requirement is not in the stock range, the product shall then be sourced if available.

Assemblies

We provide a large range of assembly options, The assembly of components to mating parts, whether it is a combination of parts supplied by us, our customer, or other specialty manufacturers. These processes may include:

  • Welding
  • Riveting
  • Chamfering
  • Drilling & Tapping
  • Unit assembly
  • Individual assembly
  • Finalized packaging ready for the market place requirements

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more