The Zenox ZHR-800 has a quality Italian made electronic pressure controller which automatically starts the pump when there is demand for water supply. The pressure controller will only operate the pump if tank water is available. The Zenox ZHR-800 will automatically switch to mains water when tank water is empty and in case of power failure. The Zenox ZHR-800 does not require an in-tank float switch which makes the system quick and easy to install.
Electronic Controller – Made in Italy
No in-tank float switch
Quick & Easy to install
AS/NZS 4020 Compliant for drinking water contact
Suitable for single & double storey homes
Automatically switches to mains in case of power failure
Watermarked dual check valve for backflow prevention
A two-pole induction motor (in=2900r/min)
Insulation Class F
Max. flow rate 60 L/m
Max. mains pressure – limited 200 kPa
Max. head 42m
Max. liquid temperature: 60°C
Max. ambient temperature: 40°C
Voltage 240V, 50Hz
Pump body: AISI 304 Stainless steel
Impeller: Stainless Steel
Motor Shaft: Stainless Steel
Mech seal: Ceramic / Graphite / NBR
Maxijet Australia | Pressure Pumps & Submersible Pumps
Maxijet Australia is an Australian owned wholesale company specialising in water conservation and water pumping for urban, rural, irrigation and commercial applications.
At Maxijet we are committed ...