The E33 is a low-cost entry into circuit board structuring. An economical and compact circuit board plotter for machining circuit boards without wet chemicals, which is barely larger than an A3 sheet of paper makes this system perfect for use in training or limited budgets.
With a spindle of 33,000rpm the ProtoMat E33 will structure single or double sided circuit boards, drill holes for through-plating and cut individual boards from the base material.
The LPKF ProtoMat S43 is the entry-level model in the ProtoMat S series. With a spindle speed of 40,000rpm the ProtoMat S43 is readily equipped for drilling, de-panelling and most structuring jobs. ProtoMat S43 is a perfect introduction to professional Rapid PCB Prototyping especially for occasional use or limited budgets.
It can be upgraded to have the same features as the S63 or the top-of-the-line S103.
The all-rounder in the LPKF ProtoMat S series is a step-up from the S43 and great for any job in in-house prototyping. ProtoMat S63 masters 2.5-dimensional material machining and features a faster spindle speed of 60,000 rpm.
Suitable for drilling test adapters, manufacturing prototype circuit boards and machining housings and front panels. With automatic tool change and milling width adjustment the ProtoMat S63 is uniform and efficient in production.
Upgradeable to S103, package includes 100,000rpm spindle, pneumatic non-contact working depth limiter and vacuum table.
High performance plotter for RF and microwave circuitry and non-contact processing of surface sensitive materials. The ProtoMat S103 is extremely fast and accurate with a spindle speed of 100,000rpm, a max. travel speed of 150mm/s and a resolution of 0.5μm. This ensures accuracy required for milling and drilling ultra fine structures.
The touchless, pneumatic depth limiter allows the processing of delicate surfaces and, soft and flexible substrates. The S103 also carefully de-panels irregular shaped flexible circuit boards from larger boards.
High end model for highest performance in the prototype and small series production of circuit boards. With a processing speed of up to 100 mm/sec the LPKF ProtoMat H100 significantly diminishes processing times and costs in PCB prototyping. Equipped with a 100,000rpm spindle motor it can realise track widths and spacing up to 100µm. A fully automated and equipped system with a built-in vacuum table guarantees minimal set-up and versatility.
For a detailed comparison between the various models, please contact our office directly.
For our latest pricelists, please click here.