Concrete Imaging & Concrete Scanning
Concrete Imaging & Concrete Scanning
Geoscope Cable Locating provides concrete imaging and concrete scanning services using GPR techniques.
Ground penetrating radar commonly referred to as GPR is a high resolution electromagnetic technique that is designed primarily to investigate the presence and position of targets located inside a concrete structure.
GPR is a method used by Geoscope for concrete imaging, concrete scanning and to scan concrete slabs, pre-fab walls, columns, footings and various concrete structures. We can mark up the position of reinforcing steel and rebar, post tension cables and pre stress cables, electrical conduits and other services embedded in concrete slabs.
GPR slab scanning is a non-destructive investigation that is safe and efficient, and used for number of reasons. We mainly find when our client needs to modify the slab or structure by core drilling or cutting penetrations it is important to keep the structural integrity intact. Damaging post tension cables or structural steel can lead to unnecessary and costly repairs.
If you are looking for a professional and experienced site investigation for:
- Post tension cables
- Electrical conduits and services in slab
- Concrete evaluations
- Mapping of structural steel and rebar
Avoid costly or dangerous hits and contact Geoscope to detect what lies beneath the surface before you cut, core or drill today.
To contact Geoscope Cable Locating about Concrete Imaging & Concrete Scanning use Get a quote.
Ground penetrating radar commonly referred to as GPR is a high resolution electromagnetic technique that is designed primarily to investigate the presence and position of targets located inside a concrete structure.
GPR is a method used by Geoscope for concrete imaging, concrete scanning and to scan concrete slabs, pre-fab walls, columns, footings and various concrete structures. We can mark up the position of reinforcing steel and rebar, post tension cables and pre stress cables, electrical conduits and other services embedded in concrete slabs.
GPR slab scanning is a non-destructive investigation that is safe and efficient, and used for number of reasons. We mainly find when our client needs to modify the slab or structure by core drilling or cutting penetrations it is important to keep the structural integrity intact. Damaging post tension cables or structural steel can lead to unnecessary and costly repairs.
If you are looking for a professional and experienced site investigation for:
- Post tension cables
- Electrical conduits and services in slab
- Concrete evaluations
- Mapping of structural steel and rebar
Avoid costly or dangerous hits and contact Geoscope to detect what lies beneath the surface before you cut, core or drill today.
To contact Geoscope Cable Locating about Concrete Imaging & Concrete Scanning use Get a quote.
Geoscope Cable Locating scans concrete slabs, prefabricated walls, columns, footings and other structures using ground-penetrating radar, marking embedded reinforcement, cables and services. Its non-destructive investigations support planning for core drilling or cutting penetrations, helping clients keep structural integrity intact. For a quote, share the structure and area to be scanned, the planned cutting or drilling, and which embedded targets you need located.
- Locates post-tension and pre-stress cables embedded in concrete
- Identifies electrical conduits and other services within concrete slabs
- Maps structural steel and rebar
- Carries out concrete evaluations
Source: listing by Geoscope Cable Locating on IndustrySearch · Updated 2 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Geoscope Cable Locating on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales