CorrosionX Heavy Duty
CorrosionX Heavy Duty
CorrosionX Heavy Duty is for super long-term protection against serious rust and corrosion assault.
For those really tough jobs where you need the ultimate protection against moisture, the answer is CorrosionX Heavy Duty.
There is no other product like it on the market today. It is a high performance, thick-film version of CorrosionX. It was developed specifically to provide maximum protection against moisture intrusion and resulting rust and corrosion. Recommended for use on boat trailers by Field and Stream.
CorrosionX Heavy Duty forms a dripless, dynamic, non-hardening, self-healing film that stubbornly resists erosion by splash or spray - including complete submersion in saltwater. It will slowly penetrate existing rust and corrosion, remove moisture and stop electrolysis. And then it seals moisture out. Unlike wax coatings, it will not dry out, stiffen or crack under stress. It will remain for hours on outdrives, even while underway!
Real World Case Studies
Whatever the application -- marine, auto, trailer, agricultural, industrial -- CorrosionX Heavy Duty is the best you can buy! Here are two case studies that point to the product's success:
Case #1
Situation: A swing bridge in Sergeant, Texas, operated by TX Department of Transportation requires two 5/8" x 600' cables to open and close.
Problem: Approximately 200' of cable is submerged under saltwater when bridge is closed. Rapid deterioration of the cables required replacement every 57 days on average.
Solution: Since the test cable had already been in use two weeks and rust was evident, the entire cable was first treated with CorrosionX Marine prior to applying CorrosionX Heavy Duty.
Results: The cable lasted 132 days and was replaced because of fatigue, not rust.
Case #2
Situation: Diesel Fuel Filtering, an Alameda, CA based company is in the business of filtering and purifying diesel fuel for boats at anchor.
Problem: It operates a 26' boat transported on a tandem-axle trailer. Both boat and trailer are in and out of saltwater on a daily basis, resulting in severe rust and corrosion of the trailer. Problems with electrical systems were common as saltwater attacked terminals and connections.
Solution: CorrosionX Heavy Duty was applied to springs, electrical connections, winch and other areas on the trailer susceptible to corrosion.
Results: Mr. Robert Sherman, owner of the company, wrote: "CorrosionX Heavy Duty was applied about two months ago and, as of this date, the barrier coat is still visible and apparently stopping further saltwater corrosion. A welcomed side benefit is the lubricating property - the trailer springs no longer squeak."
Savings: Undetermined but significant, according to Mr. Sherman. As he stated, "It's obvious the trailer will have much greater longevity."
To contact Corrosion Control NZ Ltd about CorrosionX Heavy Duty use Get a quote.
For those really tough jobs where you need the ultimate protection against moisture, the answer is CorrosionX Heavy Duty.
There is no other product like it on the market today. It is a high performance, thick-film version of CorrosionX. It was developed specifically to provide maximum protection against moisture intrusion and resulting rust and corrosion. Recommended for use on boat trailers by Field and Stream.
CorrosionX Heavy Duty forms a dripless, dynamic, non-hardening, self-healing film that stubbornly resists erosion by splash or spray - including complete submersion in saltwater. It will slowly penetrate existing rust and corrosion, remove moisture and stop electrolysis. And then it seals moisture out. Unlike wax coatings, it will not dry out, stiffen or crack under stress. It will remain for hours on outdrives, even while underway!
Real World Case Studies
Whatever the application -- marine, auto, trailer, agricultural, industrial -- CorrosionX Heavy Duty is the best you can buy! Here are two case studies that point to the product's success:
Case #1
Situation: A swing bridge in Sergeant, Texas, operated by TX Department of Transportation requires two 5/8" x 600' cables to open and close.
Problem: Approximately 200' of cable is submerged under saltwater when bridge is closed. Rapid deterioration of the cables required replacement every 57 days on average.
Solution: Since the test cable had already been in use two weeks and rust was evident, the entire cable was first treated with CorrosionX Marine prior to applying CorrosionX Heavy Duty.
Results: The cable lasted 132 days and was replaced because of fatigue, not rust.
Case #2
Situation: Diesel Fuel Filtering, an Alameda, CA based company is in the business of filtering and purifying diesel fuel for boats at anchor.
Problem: It operates a 26' boat transported on a tandem-axle trailer. Both boat and trailer are in and out of saltwater on a daily basis, resulting in severe rust and corrosion of the trailer. Problems with electrical systems were common as saltwater attacked terminals and connections.
Solution: CorrosionX Heavy Duty was applied to springs, electrical connections, winch and other areas on the trailer susceptible to corrosion.
Results: Mr. Robert Sherman, owner of the company, wrote: "CorrosionX Heavy Duty was applied about two months ago and, as of this date, the barrier coat is still visible and apparently stopping further saltwater corrosion. A welcomed side benefit is the lubricating property - the trailer springs no longer squeak."
Savings: Undetermined but significant, according to Mr. Sherman. As he stated, "It's obvious the trailer will have much greater longevity."
To contact Corrosion Control NZ Ltd about CorrosionX Heavy Duty use Get a quote.
CorrosionX Heavy Duty is a thick-film treatment that shields exposed equipment from water intrusion over extended periods. Its dripless, self-healing film resists erosion from splash, spray and full saltwater submersion, helping it stay in place in harsh conditions. Boat trailer operators can also use it to slowly penetrate rust already present on equipment and stop electrolysis.
- Unlike wax coatings, it doesn’t dry out, stiffen or crack under stress
- Stays on outdrives for hours while underway
- A trailer case study applied it to springs, electrical connections and a winch
- A case study reports that lubricated trailer springs no longer squeaked
- Field and Stream cites it for boat-trailer use
Source: listing by Corrosion Control NZ Ltd on IndustrySearch · Updated 1 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Corrosion Control NZ Ltd on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales