The Safe-Gard rupture disc acts as a reliable solution across a complete line of sizes, materials, burst pressures and process conditions. The single membrane, domed rupture disc combines the versatility of conventional metal discs with the performance benefits of scored technology making this one of the most advanced
Forward Acting Disc with superior performance Accurately scored on the vent-side for precise burst control and increased safety, Safe-Gard benefits from an industry best 5% tolerance with a 90% operating to burst pressure ratio. Its non-fragmenting design makes it ideal for relief valve isolation.
Safe-Gard is a solid metal bursting disc with smooth surface finish. Available in Stainless Steel as standard as well as other materials upon request, with or without a process side liner. Elfab can manufacture Safe-Gard to be used in the harshest of operating conditions while maintaining high levels of corrosion resistance and superior leak tightness.
For lower burst pressures Safe-Gard is available with an additional Vacuum support when back pressures or vacuums are present to further enhance the life cycle of the disc.
Safe-Gard is installed into Elfab’s forward-acting, raised face rupture disc holder and fitted with the Flo-Tel actuator as standard to allow for use of Elfab’s unique, reusable, noninvasive burst detection system Flo-Tel™+. As the only ATEX, IECEx or XD approved detection system on the market, Flo-Tel has been offering significant cost savings to customers for almost 20 years. Elfab’s rupture disc holders are available in a wide range of materials and can be manufactured to fit a multitude of industry standard flange specifications.
Leading the industry in advanced quality performance Elfab pride themselves in offering the highest level of quality and are accredited to a number of leading industry standards. Elfab’s rupture discs can be manufactured to ISO 4126 or ASME VIII dependent on customers’ requirements. When used in combination Elfab’s rupture discs and detection systems can offer industry leading SIL ratings to offer customers increased safety information.
- Industry leading 5% tolerance, up to 90% operating ratio
- Manufactured to ISO4126 or ASME VIII (UD stamp available)
- Available with protective lining if requested
- Available in a wide range of materials
- Very good life cycle
- Non-fragmenting bursting disc design
- Full vacuum capability
- Suitable for liquid, gas and vapour applications
- Smooth operating surface
- Compatible with reusable detection systems Flo-Tel™ and Flo-Tel™ xd
For further information on Rupture Discs please call or use the IndustrySearch email for a direct reply.