Edgecam - 5 Axis Simultaneous
Edgecam - 5 Axis Simultaneous
Edgecam 4 and 5-Axis machining products are designed to meet the demanding machining requirements of industries such as aerospace, automotive, medical and oil & gas.
Edgecam offers a wide range of 4 and 5-Axis strategies applicable to solids and surface geometry:
- SWARF cutting for machining of variable taper walls
- 5-Axis finishing across multiple surfaces, with control over
- Lead/lag and side tilt angles
- 5-Axis profile machining for slotting, de-flashing and trimming of sheet forms
- Full support for all common tool profiles, including lollipop cutters
- Machine simulation for safe operation
Accurate machine simulation is critically important with multi-axis machining, as small changes in tool orientation can lead to significant rotary movement of the cutting tool - with the associated risk of collisions or surface marking of the finished component.
Edgecam's 4 and 5-Axis modules include full machine simulation to aid visualisation of the machining process. The complete machine tool and all moveable axes may be modelled and incorporated within the interactive machining simulation, helping to ensure fast and safe process optimisation
To contact G-zerofive about Edgecam - 5 Axis Simultaneous use Get a quote.
Edgecam offers a wide range of 4 and 5-Axis strategies applicable to solids and surface geometry:
- SWARF cutting for machining of variable taper walls
- 5-Axis finishing across multiple surfaces, with control over
- Lead/lag and side tilt angles
- 5-Axis profile machining for slotting, de-flashing and trimming of sheet forms
- Full support for all common tool profiles, including lollipop cutters
- Machine simulation for safe operation
Accurate machine simulation is critically important with multi-axis machining, as small changes in tool orientation can lead to significant rotary movement of the cutting tool - with the associated risk of collisions or surface marking of the finished component.
Edgecam's 4 and 5-Axis modules include full machine simulation to aid visualisation of the machining process. The complete machine tool and all moveable axes may be modelled and incorporated within the interactive machining simulation, helping to ensure fast and safe process optimisation
To contact G-zerofive about Edgecam - 5 Axis Simultaneous use Get a quote.
Edgecam 5 Axis Simultaneous is a machining module that provides five-axis strategies for cutting solid and surface geometry. Its interactive machine simulation models the complete machine tool and movable axes, helping users visualise machining and optimise the process safely. For aerospace, automotive, medical and oil & gas machining, it supports common tool profiles, including lollipop cutters.
- SWARF cutting machines walls with variable taper
- 5-axis finishing covers multiple surfaces, with lead/lag and side-tilt angle control
- 5-axis profile machining handles slotting, de-flashing and sheet-form trimming
Source: listing by G-zerofive on IndustrySearch · Updated 2 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by G-zerofive on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Edgecam - Turning
Edgecam - 5 Axis Simultaneous
Edgecam | Probing Introduction
Edgecam - Milling Overview
Edgecam - Mold and Die
Strategy Manager Introduction | Edgecam
Strategies | Edgecam 4 Axis
CNC & CAM Software | Edgecam Workflow
Virtual CNC Machine Simulation & Verification | NCSIMUL Machine
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales