Edgecam - Turning
Edgecam - Turning
Edgecam Turning provides functionality for a wide range of machine tools, including 2-axis lathes, multi-turret configurations, sub-spindle turning centers and mill/turn machines with B axis.
Edgecam - Turning Introduction
Ease of use and an understanding that cycle times are critical, especially on multi-configuration mill/turn machines, underpin the development of Edgecam's turning functionality.
Edgecam produces advanced rough and finish turning cycles, together with support for facing, boring and drilling in either canned cycle or longhand format. Toolpath calculation takes into consideration the complete tooling insert and previously machined material to avoid gouging and eliminate air cutting.
Edgecam offers support for Sandvik Coromant Wiper inserts for turning tools, allowing these productivity enhancing inserts to be used reliably in all aspects of production machining.
To contact G-zerofive about Edgecam - Turning use Get a quote.
Edgecam - Turning Introduction
Ease of use and an understanding that cycle times are critical, especially on multi-configuration mill/turn machines, underpin the development of Edgecam's turning functionality.
Edgecam produces advanced rough and finish turning cycles, together with support for facing, boring and drilling in either canned cycle or longhand format. Toolpath calculation takes into consideration the complete tooling insert and previously machined material to avoid gouging and eliminate air cutting.
Edgecam offers support for Sandvik Coromant Wiper inserts for turning tools, allowing these productivity enhancing inserts to be used reliably in all aspects of production machining.
To contact G-zerofive about Edgecam - Turning use Get a quote.
Edgecam Turning provides turning functions for machine tools, from roughing and finishing to facing, boring and drilling. Its toolpath calculation accounts for the full tooling insert and material already machined, helping avoid gouging and air cutting. Production machining teams using mill/turn machines with a B axis can use it for turning operations on those configurations.
- Supports 2-axis lathes
- Supports multi-turret configurations
- Supports sub-spindle turning centres
- Facing, boring and drilling cycles can run in canned-cycle or longhand format
- Supports Sandvik Coromant Wiper inserts for turning tools
Source: listing by G-zerofive on IndustrySearch · Updated 1 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by G-zerofive on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Edgecam - Turning
Edgecam - 5 Axis Simultaneous
Edgecam | Probing Introduction
Edgecam - Milling Overview
Edgecam - Mold and Die
Strategy Manager Introduction | Edgecam
Strategies | Edgecam 4 Axis
CNC & CAM Software | Edgecam Workflow
Virtual CNC Machine Simulation & Verification | NCSIMUL Machine
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales