Continuous Level Transducer
Pyrosales offers custom designed continuous level transducers to suit your application. The continuous level transducer uses a series of reed switches that are activated by a stainless steel magnetic float, providing a 10mm resolution. This will only become critical if the span is small.
Our continuous level transducers are designed to withstand temperatures of between 5°C to 100°C and pressures up to 3000kPag and are available in either screwed or flanged process connections. An optional temperature sensor (RTD) can be incorporated into the assembly if required. The level transducer can also be fitted with an Ex 'ia' transmitter, making it suitable for use in hazardous areas.
- Loop power for transmitter 10 to 40 VDC for standard transmitter, 10 to 30 VDC for Ex 'ia'
- Current output 0-20mA, 4-20mA
- Maximum Operating Temperature 100°C
Multi Float Level
Pyrosales offers custom designed float switches to suit your application. Multi-float level switches allow you to control the level in your tank or vessel. Our level switches are made with stainless steel floats that can be reversed to give either a closed or an open contact on rising level. Up to five switch points can be supplied to cover upper and lower controls, as well as safety cutouts to shut down the system in the event of any unusual occurrence.
Pyrosales' Level Switches are designed to withstand temperatures of 120°C and pressures of 3000kPag and are available in either screwed or flanged process connections. An optional temperature sensor (RTD) can be incorporated into the assembly if required.
- Maximum Switching Power 10VA
- Maximum Switching Voltage 100V DC, 120V AC
- Maximum Switching Current 0.5 Amp DC/AC
- Maximum Operating Temperature 120°C