EMLID - GNSS Receiver | Reach RS2

Key Features:

• PPP support
  • RINEX raw data logs are compatible with OPUS, CSRS-PPP, AUSPOS, and other PPP services so you can now get centimeter-precise results in any place on Earth. Process RINEX files in an online service and get position with absolute accuracy.
• Built-in 3.5G modem and UHF LoRa radio
  • Reach RS2 features a power-efficient 3.5G HSPA modem with 2G fallback and global coverage. Now corrections can be accessed or broadcasted over NTRIP independently, without relying on Internet connection on your phone.
  • For remote areas, Reach RS2 has built-in LoRa radio that has proven to be a reliable link for RTK corrections on distances up to 8 km at 100mW.
• Designed for tough conditions
  • Reach RS2 is engineered to be waterproof and impact-resistant. Its body is manufactured in a two-step injection process and is made out of shockproof polycarbonate covered in a special elastomer for extra protection. The receiver has an industry-standard 5/8'’ mounting thread.
  • The LiFePO4 battery of Reach RS2 is designed for 16 hours work as 3.5G RTK rover on one charge regardless of weather conditions.
• Survey with ReachView app
  • The easiest to use software for data collection that is available both for Android and iOS. With ReachView, you can collect and stakeout points and control all the features of Reach RS2. Setting up a base station, logging RINEX data, configuring NMEA output—all can be done in ReachView.
• Point collection
  • Create projects and save points with custom name and description. Set rules for data quality. Data collection is fast and intuitive, because ReachView is designed to feel like most popular map apps.
• Stakeout
  • ReachView can guide you to any point like a navigator. On distance 50 cm from a point app's interface turns into bullseye view. Move the receiver to align bubbles on the screen, when interface turns green—you are on the point.
• Base station mode
  • Use Reach RS2 to set up your own base station. Stream corrections over the network via NTRIP/TCP or LoRa radio, record base logs for post-processing. Reach RS2 works with any amount of rovers and is compatible with Reach RS+ and M+
  • Reach RS2 is also compatible with any receiver that supports RTCM3 and NTRIP. External radios are supported over RS-232.