The WEIGHSAFE Series has been designed using the latest technology available and includes several state of the art on-board weighing systems that are easy to install and use.
The WEIGHSAFE 805 incorporates a micro-processor based unit connected to the hydraulic lifting system found on lifttrucks or similar machines. A load is placed on the forks and is then accurately weighed by measuring the hydraulic pressure required to raise the load. An electronic sensor measures this pressure. An accuracy of +/-1 to 2% of the lift truck capacity is typically achieved. Designed for heavy industrial use, the lift truck can weigh a load in less than 5 seconds.
This will ensure your shipments will not exceed trailer/truck capacity. Individual weight is displayed as a fixed reading, for up to 6 - 8 seconds when the “WEIGH” key is pressed, using the unique “Digi lock” software.
The WEIGHSAFE 805 will also totalize both weight and number of lifts performed - which are available on simple recall.
Easy to read/user friendly
Selectable digital filter
Selectable capacity and division sizes
Totalling function for weight accumulation
Display total number of weighings performed
Clear and stable LED display
Automatic zero tracking
Splash proof case
Zero/Tare and Accumulation function keys
Full digital calibration and function setting method
12V DC operation
External Dimensions 220mm x160mm x 85mm (includes mounting bracket)
72\48\36\24V DV to 12V DC inverter with in-line voltage suppressor
Canopy mounting bracket
Constructions Material Enclosure:Stainless Steel H44 operating range:10ºc to 50ºc ( 14ºF to 130ºF ) Sensor: Rated Pressure - 3000psi Burst Pressure - 15,000psi • Construction 17-4 Stainless Steel • Operating temp range - 10ºc to 60ºc ( 14ºF to 140ºF ) • Cable length 1.5 metres Weight:Weighsafe 805 system (1.9kg) - Shipping weight Display Digits:6 digit 15mm segmented red LED Dimensions:240mm L x 150mm D x 120mm H - Shipping Dimensions Power/Voltage:12V DC exceeds automotive power supply transient suppression specifications Warranty:12 months limited warranty on components only
The Weighsafe 805 System contains the following components:
Weighsafe 805 Indicator with mountingU-bracket
Power cable with in-line fuse protection 1.5 metre in length.
Hydraulic fittings including, 1/8 Bsp to 7/16 Jic adaptor fitting, 1/2 metre Hydraulic hose
Operation stickers and operating information, including manual
Switched On I & T Services | Seatbelt Safetybelt RDS onboard weighing
Switched On I & T Services distributes seatbelts for industrial vehicles such as forklifts, earth moving, construction and mining plant. With our electrically switching buckles we can retro fit vehicles currently in your fleet to lock out drivers not wearing the seatbelt until it is correctly fastened. Switched On distributes the unique SPRINGBELT FLEX ARM makes it uncomfortable for drivers if they do not wear the belt correctly as it gets in the way of the controls. The Springbelt Flex also comes with a electrically switching buckle that can be wired into the vehicles transmission. This means that if the seatbelt is not fastened forward and reverse motion can be stopped until the seatbelt is worn correctly.
Springbelt Flex will ensure that your operators wear the seatbelt whether or not you are looking over their shoulder 24/ 7. Springbelt flex protects employees and employers.
We also distribute onboard weighing systems for forklifts, tele handlers, wheel loaders and excavators.
Our RDS range of precision onboard weighing systems are trade certified with NMI approval for use in Australia.
Legal for Trade (NMI Approval for use in Australia), Eliminate need for a weigh bridge, Sell product legally direct from your loader, Experience faster truck turnaround times.