Ideal for monitoring humidity within greenhouses, industrial spaces, museums, saunas and humidors. They can also be used for residential applications such as controlling mould, mildew or dust mites.
Leading Enterprise Grade "Internet of Things" Solutions
Sense IoT sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 350 meters through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows Sense IoT sensors to have better interference immunity from other wireless devices. Superior power management provides Sense IoT sensors with almost twice the battery life of standard wireless sensors.
Coin cell sensors typically last 3+ years.
AA and Industrial sensors typically last up to 12+ years.
Sense IoT products employ Sense IoT new Encrypt-RF® Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows Sense IoT sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow Sense IoT products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements. Operating Range The sensor shows best performance when operated within recommended normal temperature and humidity range of 5°C– 60°C and 20%RH – 80%RH, respectively. Long-term exposure to conditions outside normal range, especially at high humidity, may temporarily offset the RH signal (e.g. +3%RH after 60h kept at >80%RH). After returning into the normal temperature and humidity range the sensor will slowly come back to calibration state by itself. Prolonged exposure to extreme conditions may accelerate ageing. *Actual range may vary depending on environment. **Battery life is determined by sensor reporting frequency and other variables.
Scientific grade sensor
+/- 3% accuracy (between 10% – 90% RH).
What's in the box?
2 x AA Batteries
Greenhouse temperature and humidity monitoring
Agricultural environmental monitoring
Art gallery and museum environment monitoring
Humidity Sensor Applications
Product Code: SNS2-9-W2-HU-RH
Accuracy: +/-3% Under normal conditions (10% – 90% RH)
RH Operating Range: 0-100% RH
RH Response Time: 8 Sec (tau 63%)
Battery Type: 2 Replaceable AA 1.5 V Batteries
Dimension: 111.1mm x 62.7mm x 28.5mm
Supply Voltage: 2.0 – 3.8V (2 x AA 1.5V Batteries or Optional Power Supply
Battery Life: At 1 hour heart-beating setting, included AA batteries will typically last 6-8 Years.
Max Operating Temperature Using AA Alkaline: -18ºC to +55ºC
Max Operating Temperature Using AA Lithium: -40ºC to +60ºC
Optimal Battery Operating Temperature: +10ºC to +50ºC
Enclosure Material: ABS
433 MHz Specifications
Operating Frequency: 433 MHz Operating Frequency
Certifications: CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950.
Device Range: Devices range up to 350m non-line-of-sight, wireless device range*
Sense IoT knows the importance of predictive maintenance and how this is a direct reflection on the installer and maintainer of the system— that is why we are dedicated to providing customers with an ...