- Jumper Assemblies in Wireless Communications Systems
- Short Antenna Feeder runs (e.g. WLL, GPS, LMR, Mobile Antennas)
- Any application that requires periodic /repeated flexing
LMR - UltraFlex has a stranded center conductor and rubber outer jacket designed for multiple bending /flexing cycles. It is used for both indoor and outdoor applications.
Flexibility and bendability are hallmarks of the LMR- 240-UF cable design. The flexible outer conductor enables the tightest bend radius available for any cable of similar size and performance.
Low Loss is another hallmark feature of LMR-240- UF. Size for size LMR has the lowest loss of any flexible cable and comparable loss to semirigid hard-line cables.
RF Shielding is 50 dB greater than typical single shielded coax (40 dB). The multi-ply bonded foil outer conductor is rated conservatively at > 90 dB (i.e. >180 dB between two adjacent cables).
Weatherability: LMR-240-UF cables are designed for outdoor exposure and have a life expectancy in excess of 10 years.
Connectors: A wide variety of connectors are available for LMR-240-UF cable, including all common interface types, reverse polarity, and solder-on center pins. Most LMR connectors employ crimp outer attachment using standard hex crimp sizes.
Cable Assemblies: All LMR-240-UF cable types are available as pre-terminated cable assemblies. Refer to the section on FlexTech for further details.
Please use the Industrysearch form for more information.