VHF Stainless Steel Antennas Get latest price

VHF Stainless Steel Antennas

393 Recent Views Call for more details

Stainless Steel antennas are electrically designed to be used with a ground plane.Best results are achieved when the antenna is mounted in the centre of the vehicle’s roof.

Stainless Steel antennas are generally purchased for their extended life span, as they are capable of handling abusive environments. This characteristic trade-off does although reduce the electrical performance of the antenna in comparison to braided Fibreglass whips.

MODEL A – 206

3.5Ft (1070mm long) ¼ Wave

Stainless Steel Parallel Whip Unity Gain

VHF Low Band 70 to 85 MHz

MODEL A – 206T

3.5Ft (560mm long) ¼ Wave

17-7ph Tapered Stainless Steel

Unity Gain VHF Low Band 70-85 MHz

MODEL A – 207

1.1Ft (560mm long) ¼ Wave

Stainless Steel Whip Unity Gain

VHF High Band 148-175 MHz

MODEL A – 755

Ferrule only to suit any standard VHF26TPI threaded base.This ferrule is fitted with a grub screw adjustment, which allows for the easy replacement of any stainless steel whip.In particular this ferrule was designed to accept the W – 490 tapered, super flexible Larsen Stainless Steel Whip.

MODEL W – 490

Whip only, tapered, super flexible Stainless Steel whip

VHF Low Band 70-85 MHz Unity Gain

Brochure (.pdf) >>

Read more...

To contact Rojone about VHF Stainless Steel Antennas use Get a quote.

Stainless Steel antennas are electrically designed to be used with a ground plane.Best results are achieved when the antenna is mounted in the centre of the vehicle’s roof.

Stainless Steel antennas are generally purchased for their extended life span, as they are capable of handling abusive environments. This characteristic trade-off does although reduce the electrical performance of the antenna in comparison to braided Fibreglass whips.

MODEL A – 206

3.5Ft (1070mm long) ¼ Wave

Stainless Steel Parallel Whip Unity Gain

VHF Low Band 70 to 85 MHz

MODEL A – 206T

3.5Ft (560mm long) ¼ Wave

17-7ph Tapered Stainless Steel

Unity Gain VHF Low Band 70-85 MHz

MODEL A – 207

1.1Ft (560mm long) ¼ Wave

Stainless Steel Whip Unity Gain

VHF High Band 148-175 MHz

MODEL A – 755

Ferrule only to suit any standard VHF26TPI threaded base.This ferrule is fitted with a grub screw adjustment, which allows for the easy replacement of any stainless steel whip.In particular this ferrule was designed to accept the W – 490 tapered, super flexible Larsen Stainless Steel Whip.

MODEL W – 490

Whip only, tapered, super flexible Stainless Steel whip

VHF Low Band 70-85 MHz Unity Gain

Brochure (.pdf) >>

Read less...

To contact Rojone about VHF Stainless Steel Antennas use Get a quote.