Joints and Extensions
Parallel Gear Drive - designed for use inside the header boxes where hand holes are not in line with tube centerline.
Right Angle Gear Drive - designed for use inside header boxes where handholds are at right angle to the tube centerline. For hand and power use.
Manual drive for tube expanders. One side 3/4” square drive, other side 1” square drive. Allows rotation transmitted by a retched mechanism.
Double Universal Joint and Double Universal Joint with Quick Change Chuck.
Extensions and Extensions with Quick Change Chuck (QCC), Single and Double.
Single Universal Joint and Single Universal joint with Quick Change Chuck (QCC).
The Tube Guide consist of a steel or aluminium or plastic tapered head and an replaceable nylon brush, and it’s used to guide tubes through the sheets and the tube support plates during tube bundles assembling. The nylon brush fits in the tube end, holding pilot firmly in place.
Ideal for sealing leaky tubes in condenser and heat exchangers. It is recommended to use our ORTC - one revolution tube cutter to puncture the tube to ensure that pressure can not build up in the tube and cause the plug loosen or blow out.