Xtroll Rust Conqueror UV is designed to prevent, treat and stop rust!
Minimal preparation is required. Xtroll Rust Conqueror can be applied directly to rusted surfaces or used as rust preventative by brush, spray gun, misting bottle or even a rag. 1 Litre will treat up to 30 square metres.
Xtroll Rust Conqueror is one of the most versatile products around. It will prime, seal and protect a wide range of materials. Not only is it suitable for a wide range of metal surfaces (iron, steel, aluminium, galvanized, brass, painted surfaces, etc), it also protects most plastics, rubber, vinyl, leather and other materials.
Xtroll Rust Conqueror dries to a hard wearing, non-tacky, varnish like clear finish. It can be added directly to badly rusted areas to prevent further corrosion and is UV stable, non-toxic and very safe to handle. It’s an excellent penetrant and totally permeates the rust. Just apply it at intervals until rust takes on a gloss finish.
Once dry, it can then be painted over where required. Unlike other off-the-shelf rust treatments, Xtroll does not need hours of methodical preparation. As you’ll see in our video below, Xtroll’s high coverage rate makes it a low cost solution to all your rust and corrosion problems.
- Dries to a hard wearing varnish like finish, that is dry (non-tacky), and flexible.
- Leaves a barrier that’s highly resistant to acids and chemicals
- When welding is necessary, there are no toxic fumes
- Primes, seals and penetrates a wide range of material surfaces
- Needs little preparation
- Suitable for all metals & other materials
- Coverage up to 30sq m/Litre (by brush, spray, roller, etc)
- Excellent UV resistance
- Smooth finish acts as a mud repellent to make cleaning easier
- Can be painted over if required
- Environmentally safe product (organic based)
- Australian made and owned
For more information, or to order online, click here.
-205x205.jpg)
