In-situ Oxygen analysis for concentrations as low as 1 x 10^-30 to 100%

Supplier: Intelligent Systems Pty Ltd
06 October, 2021

The Novatech 1231 and 1232 Oxygen Probes are Australian-made and embody the research and development of one of Australia’s premier research organisations, the CSIRO.

The Novatech 1231 and 1232 Probes are highly accurate and have minimal drift (±1%). The Novatech in situ probes are highly durable; choose the Novatech 1231 for analysing gases with temperatures below 900ºC and the Novatech 1232 for temperatures 700°C to 1400°C.

They are ideal for:

  • Flue gas analysis
  • Oxygen levels in boilers, kilns, and furnaces
  • Combustibles analysis
  • Carbon potential measurement
  • Water vapour concentration and dew point measurement
  • Inert and sterile packaging
  • General industrial use
  • Annealing furnaces

The Novatech 1231 and 1232 Probes have a very rapid response to changes in oxygen levels
A response time of between 1 and 4 seconds to oxygen level concentration changes means that potentially hazardous situations such as those caused through the build-up of dangerous, fuel-rich conditions can be avoided

The Novatech 1231 and 1232 Probes are easy to install
The probes are inserted into the flue, or other measuring point, and the threaded nipple (1231 has 1.5 “ BSP/NPT; 1232 has 0.75” BSP/NPT) is screwed on to a mating socket welded to the process. Connect the probe cable to the transmitter, and you are ready to measure and/or control the combustion process.

Novatech offers you safety of operation
Use the Novatech 1732 which has a main burner safety interlock. This is the ONLY reliable way of preventing potentially explosive situations; SHOULD THE MAIN BURNER FAIL OR SHUT DOWN THEN THE SENSOR’S HEATER IS DE-ENERGISED SO THAT DANGEROUS FLUE GASES CANNOT BE IGNITED BY THE PROBE!