0.02% of full scale for one year pressure specification
0.005% full scale minimum
Measure, source, and simulate 4-20mA signals
24V loop powered
Built-in HART communication
Measure temperature with optional 720RTD probe
Compatible with 700 & 750 series pressure modules
IP54 ingress protection rated & 3ft (1m) drop tested
It has an internal electric pump which provides automatic pressure generation and regulation to test multiple pressure test points and document the results.
Operation is as simple as entering starting and ending test pressures, the number of test points, and the tolerance level. From there the Fluke 729 automatically documents the applied pressure, measured in mA and % error, for each test point. Out-of-tolerance test results are clearly indicated on the graphical display.
Compensate for minor leaks in hoses and test setups with automatic internal fine pressure adjustment. This eliminates the need to manually pump in order to make fine adjustments during test setups.
The built-in HART communication enables HART transmitter mA adjustments, output trim, configuration, and adjustments of applied 0% and 100% values. It can also accomplish light configuration tasks such as changing a transmitter tag, measurement units, and ranging. This calibrator is available with Fluke Connect, which allows you to perform remote monitoring through a mobile app, store pressure measurements, and log events.
Triplepoint Calibrations | Test and Measurement Equipment
Triple Point Calibrations Pty Ltd was formed on 1st of December 2006. Our vision is to provide our customers with quality products, advice and Calibration Services to cope with their day to day ...