Additel Automatic Handheld Pressure Calibrator | ADT 760

Additel Automatic Handheld Pressure Calibrator | ADT 760

Additel Automatic Handheld Pressure Calibrator | ADT 760

There are three models to choose from: 

ADT760-LLP The 760-LLP is designed for low pressure calibration and comes with a built-in pressure module to ±30 inH2O (±75 mbar) and provides an accuracy to 0.05%FS. If you need to go lower in pressure, you can purchase additional internal pressure modules (ADT155 series), which for the 760-LLP provide a variety of ranges down to ±0.25 inH2O (±0.62 mbar). The accuracy of 0.05%FS and control stability 0.005%FS is based on the internal module’s span. Measurements can be made in gauge or differential mode.

ADT760-D The 760-D gives you differential and gauge pressure but at a higher pressure range than the ADT760-LLP. Covering the range of -12.5 to 35 psi (-0.86 to 2.5 bar) and with an accuracy of 0.02%FS, the ADT760-D is an ideal solution to cover very common gauge and differential pressure measurements. The Additel 760-D comes with an internal module covering its full range, but lower pressure modules down to ±10 inH2O differential can be purchased to improve accuracy at lower pressures.

ADT760-MA The 760-MA generates and controls pressure from vacuum pressures up to 300 psig (20 bar.g) with an accuracy of 0.02%FS. Equipped with a built-in barometric reference, each unit can switch between gauge and absolute pressure types. A variety of internal sensors are available which offer lower pressure ranges for improved performance. Documenting Process Functionality Each model of the Additel 760 series has an option incorporating documentation and communication functions turning your 760 into a multifunction documenting process calibrator. This feature provides HART communication, task documentation and data logging.

Each unit has the capability to measure voltage and current and supply 24V loop power. As an optional feature, each model can be configured to data log pressure readings, setup calibration tasks, and communicate with HART-smart devices.

• Fully automatic calibrator with built-in pump and controller
• Switchable internal pressure modules for expandable ranges
• Accuracy (1 year) of 0.02%FS
• External pressure modules available (measure only)
• Less than 4 lbs (1.8 kg) for handheld operation
• Source pressure, measure pressure and electrical
• 4 channels
• Optional HART communications
• Optional data logging and task documenting
• USB, Wi-Fi, and Bluetooth communications 
  
  

All ADT760s come with and adaptor set for convenient connection, external power supply, Li-ion rechargeable battery pack, test leads and NIST-Traceable certificate of calibration with data. Additel offers a variety of cases, hose test kits, external pressure modules, and accessories.

For more information or a quote on Additel ADT 760 Automatic Handheld Pressure Calibrator models please call or use the IndustrySearch enquiry for a fast and direct reply.

Read more...

To contact Zedflo Australia about Additel Automatic Handheld Pressure Calibrator | ADT 760 use Get A Quote.

There are three models to choose from: 

ADT760-LLP The 760-LLP is designed for low pressure calibration and comes with a built-in pressure module to ±30 inH2O (±75 mbar) and provides an accuracy to 0.05%FS. If you need to go lower in pressure, you can purchase additional internal pressure modules (ADT155 series), which for the 760-LLP provide a variety of ranges down to ±0.25 inH2O (±0.62 mbar). The accuracy of 0.05%FS and control stability 0.005%FS is based on the internal module’s span. Measurements can be made in gauge or differential mode.

ADT760-D The 760-D gives you differential and gauge pressure but at a higher pressure range than the ADT760-LLP. Covering the range of -12.5 to 35 psi (-0.86 to 2.5 bar) and with an accuracy of 0.02%FS, the ADT760-D is an ideal solution to cover very common gauge and differential pressure measurements. The Additel 760-D comes with an internal module covering its full range, but lower pressure modules down to ±10 inH2O differential can be purchased to improve accuracy at lower pressures.

ADT760-MA The 760-MA generates and controls pressure from vacuum pressures up to 300 psig (20 bar.g) with an accuracy of 0.02%FS. Equipped with a built-in barometric reference, each unit can switch between gauge and absolute pressure types. A variety of internal sensors are available which offer lower pressure ranges for improved performance. Documenting Process Functionality Each model of the Additel 760 series has an option incorporating documentation and communication functions turning your 760 into a multifunction documenting process calibrator. This feature provides HART communication, task documentation and data logging.

Each unit has the capability to measure voltage and current and supply 24V loop power. As an optional feature, each model can be configured to data log pressure readings, setup calibration tasks, and communicate with HART-smart devices.

• Fully automatic calibrator with built-in pump and controller
• Switchable internal pressure modules for expandable ranges
• Accuracy (1 year) of 0.02%FS
• External pressure modules available (measure only)
• Less than 4 lbs (1.8 kg) for handheld operation
• Source pressure, measure pressure and electrical
• 4 channels
• Optional HART communications
• Optional data logging and task documenting
• USB, Wi-Fi, and Bluetooth communications 
  
  

All ADT760s come with and adaptor set for convenient connection, external power supply, Li-ion rechargeable battery pack, test leads and NIST-Traceable certificate of calibration with data. Additel offers a variety of cases, hose test kits, external pressure modules, and accessories.

For more information or a quote on Additel ADT 760 Automatic Handheld Pressure Calibrator models please call or use the IndustrySearch enquiry for a fast and direct reply.

Read less...

To contact Zedflo Australia about Additel Automatic Handheld Pressure Calibrator | ADT 760 use Get A Quote.