Franklin Electric - 3.7kw 150LPM Bore Submersible Pumps -Single 1 Phase | FPS-9A-26TS Price Guide: $4,720 Get latest price

3.7kw 150LPM Bore Submersible Pumps -Single 1 Phase | FPS-9A-26TS

54 Recent Views In Stock

3.7kw 150LPM Single 1 Phase Bore Pump

• Assembly includes pump, motor and 1 Phase starter box.
• 4400 Tri-Seal 4-Inch Bore Pump and Motor Kit.
• 9m³/h flow ratings
• 150 liters per min / 2.5 liters per second @ 84m head

The Franklin FPS-9A-26TS has a 3.7kw/5hp 3-wire 1 phase motor.

The 3-wire 1 phase require a starter box which comes standard when you buy this combination.

There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below.

Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.

Options to purchase with your kit to suit this pump

Bore Cap

• This model has a 2 inch (50mm) discharge thread, so if you are using 50mm pipe diameter then a 2 inch Bore Cap would be recommended. If you are using a 1.5 inch (40mm) pipe diameter then a 1.5 inch Bore Cap would be recommended.

Shroud Adapter

• A shroud adapter is only needed if you are installing a 4 inch pump down 6 inch or larger casing.
• If using 50mm pipe diameter then a 50 x 100mm (2 inch riser) PVC Shroud Adapter would be recommended.

Electrical Cable

• The info below is a guide only, you must check with your electrician on cable size.
• 1 Phase Cable (3-wire/4 core) – 4mm sq cable up to 40m, 6mm sq cable up to 60m, 10mm sq cable up to 110m, 16mm sq cable up to 170m
• Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.

Stainless Steel Support Cable

• Available in 3mm cable or 4mm cable

Stainless Steel Support Cable Grips/Clamps

• Available in 3mm or 4mm to suit S/S Cable

Pressure Gauges

• Liquid Filled 63mm – Available in 0-800 kPa, 0-1000 kPa, 0-1600 kPa and 0-2500 kPa

Flexible Riser Pipe

• Series 100 is for depths up to 100. The sizes are 32 mm and 50 mm internal diameter.
• Series 200 is for depths up to 250m. The sizes range from 40mm, 50mm, 76mm, 102mm, 127mm, 152mm & 200mm internal diameter.
• As well as the Couplings, ties, joiners and installation roller.

Single 1 Phase Motor Protection

• If you purchase a single phase 3-wire kit, then you will need a Pumptec Plus as your motor protection device.

***3 Year Warranty

View the 3.7kw 150 LPM Single 1 Phase Bore Pump here

 

Read more...

To contact Strongman Pumps about Franklin Electric 3.7kw 150LPM Bore Submersible Pumps -Single 1 Phase | FPS-9A-26TS use Get a quote.

3.7kw 150LPM Single 1 Phase Bore Pump

• Assembly includes pump, motor and 1 Phase starter box.
• 4400 Tri-Seal 4-Inch Bore Pump and Motor Kit.
• 9m³/h flow ratings
• 150 liters per min / 2.5 liters per second @ 84m head

The Franklin FPS-9A-26TS has a 3.7kw/5hp 3-wire 1 phase motor.

The 3-wire 1 phase require a starter box which comes standard when you buy this combination.

There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below.

Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.

Options to purchase with your kit to suit this pump

Bore Cap

• This model has a 2 inch (50mm) discharge thread, so if you are using 50mm pipe diameter then a 2 inch Bore Cap would be recommended. If you are using a 1.5 inch (40mm) pipe diameter then a 1.5 inch Bore Cap would be recommended.

Shroud Adapter

• A shroud adapter is only needed if you are installing a 4 inch pump down 6 inch or larger casing.
• If using 50mm pipe diameter then a 50 x 100mm (2 inch riser) PVC Shroud Adapter would be recommended.

Electrical Cable

• The info below is a guide only, you must check with your electrician on cable size.
• 1 Phase Cable (3-wire/4 core) – 4mm sq cable up to 40m, 6mm sq cable up to 60m, 10mm sq cable up to 110m, 16mm sq cable up to 170m
• Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.

Stainless Steel Support Cable

• Available in 3mm cable or 4mm cable

Stainless Steel Support Cable Grips/Clamps

• Available in 3mm or 4mm to suit S/S Cable

Pressure Gauges

• Liquid Filled 63mm – Available in 0-800 kPa, 0-1000 kPa, 0-1600 kPa and 0-2500 kPa

Flexible Riser Pipe

• Series 100 is for depths up to 100. The sizes are 32 mm and 50 mm internal diameter.
• Series 200 is for depths up to 250m. The sizes range from 40mm, 50mm, 76mm, 102mm, 127mm, 152mm & 200mm internal diameter.
• As well as the Couplings, ties, joiners and installation roller.

Single 1 Phase Motor Protection

• If you purchase a single phase 3-wire kit, then you will need a Pumptec Plus as your motor protection device.

***3 Year Warranty

View the 3.7kw 150 LPM Single 1 Phase Bore Pump here

 

Read less...

To contact Strongman Pumps about Franklin Electric 3.7kw 150LPM Bore Submersible Pumps -Single 1 Phase | FPS-9A-26TS use Get a quote.