It has outputs for the “automatic” and/or “manual” control of contactors or motorised circuit breakers and switches. It can also manage a third control device as tie breaker or non-priority load management. the layout and system status are displayed directly on the graphic LCD.
• 2 each with 1 normally open contact (NO – SPST) rated 12A 250VAC.
• 2 each with 1 normally open contact (NO/NC – SPST) rated 8A 250VAC.
• 3 each with 1 changeover contact (NO/NC-SPDT) 8A 250VAC.
• flush-mount housing: 180x240mm.
AC and DC supply inputs.
Measurement inputs for three phase + neutral voltage values; also suitable for 1 and 2 phase lines.
128×80 backlit graphic LCD to display measurements, events and alarms in 8 languages (English, Italian, French, Spanish, German, Portuguese, Polish and Russian).
Active operating mode indicator LED.
Viewing of L-L and L-N voltage values of the controlled lines.
Status viewing of contactors or motorised circuit breakers both via display and LED.
6 system layouts available.
Management of a tie breaker.
8 programmable digital inputs.
7 programmable relay outputs.
Configuration programming of lines, type of source (line/generator), control and supervision parameters for emergency demand of generating set.
Possibility of transferring load with closed transition and spontaneous or controlled genset synchronisation.
Non-priority load management.
Built-in programmable PLC logic.
Built-in RS485 communication.
Virtual calendar clock (RTC).
Communication interface via front optical port with CX01 or CX02 dongle using USB or Wi-Fi.
Parameter programming via NFC technology and the NFC App.
Compatible with Synergy supervision and energy management software, Xpress remote control and configuration software and with the Sam1 application for Androids/iOS.
Modbus-RTU, ASCII and TCP communication protocol.
Control Functions of the Lines:
Phase sequence and phase loss.
Minimum and maximum voltage.
Minimum and maximum frequency.
Automatic transfer switch controller with optical port and NFC for controlling 2 lines and 1 tie breaker, 110…240VAC supply and 12/24/48VDC, expandable with EXP… series expansion modules.
Mechtric | Industrial Automation & Control Products
The Mechtric Group is a 100% Australian owned group of companies specialising in the supply of electrical and mechanical engineering products.
Our product range consists of a wide range industrial ...