Surge Protection Devices Type 1 And 2

Surge Protection Devices Type 1 And 2

Surge Protection Devices Type 1 And 2

It protects against direct and indirect lightning strikes as well as induced over-voltage conditions. It can be installed in areas with a high risk of direct lightning strikes, inside main distribution boards or sub distribution boards.

Characteristics:

• IEC maximum continuous operating voltage Uc:
  320VAC/420VDC
• IEC maximum discharge current Imax (8/20μs):
  100kA per pole
• IEC rated discharge current In (8/20μs):
  25kA per pole
• Standard-supplied contact type of remote status
  indicator signalling
• IEC degree of protection: IP20.

 

To contact Mechtric about Surge Protection Devices Type 1 And 2 use Get A Quote.

Surge Protection Devices Type 1 And 2

It protects against direct and indirect lightning strikes as well as induced over-voltage conditions. It can be installed in areas with a high risk of direct lightning strikes, inside main distribution boards or sub distribution boards.

Characteristics:

• IEC maximum continuous operating voltage Uc:
  320VAC/420VDC
• IEC maximum discharge current Imax (8/20μs):
  100kA per pole
• IEC rated discharge current In (8/20μs):
  25kA per pole
• Standard-supplied contact type of remote status
  indicator signalling
• IEC degree of protection: IP20.

 

Read less...

To contact Mechtric about Surge Protection Devices Type 1 And 2 use Get A Quote.