Atlas Copco - Centrifugal Pump | Atlas Copco PAC H108

Centrifugal Pump | Atlas Copco PAC H108

Centrifugal Pump | Atlas Copco PAC H108

Centrifugal Pump | Atlas Copco PAC H108

Centrifugal Pump | Atlas Copco PAC H108

Centrifugal Pump | Atlas Copco PAC H108

Centrifugal Pump | Atlas Copco PAC H108

• Available as a Canopy or open set - the PAC H108 pump system consists of a centrifugal pump and a separator, which enables air to be separated from the liquid and be sucked by a vacuum pump - making automatic priming possible. Even with suction heights of several meters the machine rapidly evacuates the air from the suction pipe and starts to pump. Additionally, thanks to the semi-open impeller, the PAS HF range is also suitable for pumping liquids with solids in suspension. For more information - please refer to the attached Atlas Copco PDF brochure
  
  Additional Benefits
  
  Pump - (High efficiency: 82% (B.E.P.)
  Rapid “dry” priming - (Up to a height of 7,5 m (24.6 ft)
  High resistance - (To abrasive liquids and turbid sandy waters)
  Closed impeller - (Solids handling up to 89 mm (3.5")
  Diaphragm vacuum pump -(Suitable for dry running: no contamination of the environment)
  Mechanical shaft seal in oil bath - (It allows the “dry running” operation of the pump)

Read more...

To contact Compressed Air Light & Power about Atlas Copco Centrifugal Pump | Atlas Copco PAC H108 use Get a quote.

• Available as a Canopy or open set - the PAC H108 pump system consists of a centrifugal pump and a separator, which enables air to be separated from the liquid and be sucked by a vacuum pump - making automatic priming possible. Even with suction heights of several meters the machine rapidly evacuates the air from the suction pipe and starts to pump. Additionally, thanks to the semi-open impeller, the PAS HF range is also suitable for pumping liquids with solids in suspension. For more information - please refer to the attached Atlas Copco PDF brochure
  
  Additional Benefits
  
  Pump - (High efficiency: 82% (B.E.P.)
  Rapid “dry” priming - (Up to a height of 7,5 m (24.6 ft)
  High resistance - (To abrasive liquids and turbid sandy waters)
  Closed impeller - (Solids handling up to 89 mm (3.5")
  Diaphragm vacuum pump -(Suitable for dry running: no contamination of the environment)
  Mechanical shaft seal in oil bath - (It allows the “dry running” operation of the pump)

Read less...

To contact Compressed Air Light & Power about Atlas Copco Centrifugal Pump | Atlas Copco PAC H108 use Get a quote.

PRS PAC H108 FSC01 SKID EN Padua 2960 6590 00(0.39MB)

Brochure-PAC-H-range-high-head-pumps(2.61MB)

PAC H(4.66MB)