Hydraulic Press Brake | YSD PPTK

Standard Features of YSD PPT Series Press Brake:

• The machine is made under technology license from LVD, Belgium.
• Full steel welded structure, stress released through vibration by adopting Germany technology, with rigidity and accuracy well kept. Warranty for the main frame of the machine is full working life.
• Main frame and component is designed and Finite Element Analyzed under ANSYS/UG software.
• Simple, effective and accurate synchronized balancing system, synchronization of ram movement achieved through torsion bar.
• Double-acting YSD quality cylinders ensure high reliability and safety.
• Reliable hydraulic system, integrated Mono-block hydraulic system and worldwide famous valves and seals are adopted, and the pipeline and connections are reduced to the minimum level to ensure minimum maintenance.
• High-pressure internal gear pump from NACHI, Japan, with reliability and low noise.
• Relief valve is adopted to protect the oil pump and hydraulic system when over-loading.
• Pressure gauge could be adjusted manually according to actual required bending force. Thus the hydraulic valves and oil seals could run reliably and safely for long life.
• Simple and compact electrical design is adopted for the convenience of maintenance. All electrical components is selected according to DIN and ISO standard.
• Control on three points: Top Dead point, Bottom Dead point and Mute point.

Specifications:

• Press force  KN: 1350
• Working length mm: 3000
• Distance between uprights: 2550
• Stroke of ram  mm: 130
• Ram travel adjustment mm: 110
• Daylight  mm: 310
• Throat depth  mm: 300
• Approaching speed mm/s: 100
• Working speed  mm/s: 8
• Returning speed  mm/s: 60
• Motor power  kw: 7.5
• Approx.weight  kg: 7500
• Back gauge travel  mm: 600
• Volume of oil tank  L: 125
• Length of machine  mm: 3145
• Width of machine  mm: 1435
• Height of machine  mm: 2420