Can be handled by a single person. Consist of a hydraulic pump driven by a foot-pedal, cutting shears, two separator pliers and a hydraulic cylinder with extensions and support heads. Can be used for separation, cutting and pushing operations.
Separation, cutting and pushing are the three Basic operations that can be carried out with the rescue unit. The various tools are connected individually to the pump via a hydraulic hose, equipped with al the necessary quick-connect ball plugs. Connection is both quick and secure. No threads. Simply push or pull the plug to connect or disconnect the tool from the hose.
The size of the tool enables the user to operate effectively even in hard-to-reach areas (pedals). The pump has two speeds: fast feed for moving the tool near the target material, and working speed, which is automatically enabled when the pressure in the installation increases.
High pressure pumping is carried out via the pedal without the need for undue physical exertion, leaving your hands free to hold the tool. Once the operation has been completed, simply press the release pedal located on the right-hand side of the pump. An internal spring causes the tool rapidly to return to its original position. The unit is stored in a highly resistant box equipped with wheels and a receding handle for easy transportation.
Larzep Australia | 700 Bar (10,000 psi) Hydraulic Equipment
Larzep Australia is a unit of Larzep Spain, manufacturer of 700 bar pumps, high tonnage cylinders and job specific high force tools.
Whilst relatively new in Australia, Larzep has been manufacturing ...