Anton Paar Automatic Kinematic Viscometer ...

Anton Paar - Automatic Kinematic Viscometer SVM 1001 Simple Fill

Supplier: Anton Paar Australia

Automatic Kinematic Viscometer SVM 1001 Simple Fill

1/4

Kinematic viscometers SVM 1001 determines kinematic and dynamic viscosity & density from a single run, Enjoy all the benefits of ASTM D7042 and report in both D7042 as well as D445 with the integrated ASTM-defined bias corrections.

Video for Anton Paar Automatic Kinematic Viscometer SVM 1001 Simple Fill

Kinematic viscometer as per ASTM D7042

In Stock

Key Features

Fill sample or solvent directly from the container with Simple Fill funnel: No pipette or syringe required with SVM 1001 Simple Fill and SVM 1101 Simple Fill
Benefit from an intuitive user interface and compact design (battery option available)
Select your temperature between 15 °C and 100 °CGet results digitally in less than five minutes with just 1.5 mL of sample: no more stopwatch or manual calculations
Use one unbreakable cell instead of 12 Ubbelohde viscometers

Save time with our automatic kinematic viscometers

150 % higher throughput compared to manual methods
Faster results help avoid out-of-spec production
Temperature equilibration in one minute or less
Fill sample or solvent directly from the container with Simple Fill funnel: No pipette or syringe required with SVM 1001 Simple Fill and SVM 1101 Simple Fill

Experience error-free digital data handling

Automatic calculations and digital data recording and storage for error-free measurements and traceability
Data export from device to a PC or USB drive
One-click data access from your automatic kinematic viscometer

Improve safety for lab and operator

A metal measuring cell makes glass breakage a thing of the past
Built-in Peltier thermostatting for fast temperature control
Reduced exposure to hazardous solvents or flammable bath liquids

Minimal sample, solvent, and energy consumption

Analysis with just 5 mL of sample and 6 mL of solvent
Low energy consumption – 50 W to get started
Minimal downtime: 2-minute cleaning, 30-minute downtime during maintenance
Quality control documentation efforts reduced by 50 %
No external PC or software needed

Stay compliant and benefit from bias correction

ASTM D7042 is referenced in ASTM, SAE, ISO, IP, EN, DIN, DEFSTAN, ML, GB, GOST, and other standards as an accepted alternative to D445
With the ASTM bias correction, you can report results in both D7042 and D445
Complies with ASTM D396, D975, D1655, D3699, D6158, D6823, D7467, and other standards
ASTM D4052 density measurement included (SVM 1101 Simple Fill)

Technical specifications

	SVM 1001	SVM 1001 Simple Fill	SVM 1101 Simple Fill	SVM 2001	SVM 3001	SVM 3001 Cold Properties	SVM 4001
Patents	AT516058 (B1), US10036695 (B2), CN105424556, EP2995928 (B1)		AT516058 (B1), US10036695 (B2), CN105424556, EP2995928 (B1), AT 516302 (B1), CN105628550	AT516058 (B1), US10036695 (B2), CN105424556, EP2995928 (B1)	AT516058 (B1), US10036695 (B2), CN105424556, EP2995928 (B1) AT516302 (B1), CN105628550
Test methods	ASTM D7042, D445 bias corrected, ISO 23581, EN 16896		ASTM D4052, ISO 12185	ASTM D7042, D445 bias-corrected, ISO 23581, EN 16896 ASTM D4052 (optional)	ASTM D7042, D445 bias-corrected, ISO 23581, EN 16896 ASTM D4052, ISO 12185	ASTM D7042, D445 bias -corrected, ISO 23581, EN 16896 ASTM D4052, ISO 12185 ASTM D2386 equiv. or better ASTM D2500 equiv. or better	ASTM D7042, D445 bias-corrected, ISO 23581, EN 16896, ASTM D4052, ISO 12185
Measuring Range
Viscosity	0.3 mm²/s to 5,000 mm²/s		0.3 mm²/s to 1,000 mm²/s	0.2 mm²/s to 30,000 mm²/s*
Density	-	-	0 g/cm³ to 3 g/cm³	0 g/cm³ to 3 g/cm³
Temperature	+15 °C to +100 °C (one temperature, second temperature optional)		+15 °C to +100 °C	+15 °C to +100 °C	-60 °C to +135 °C	-60 °C to +100 °C	+15 °C to +100°C
Precision
Viscosity repeatability and reproducibility	0.1 % and 0.35 %		0.2 % and 0.7 %	0.1 % and 0.35 %
Density repeatability and reproducibility	-	-	0.00005 g/cm³ and 0.0001 g/cm³	0.0002 g/cm³ (0.00005 g/cm² with ASTM D4052 option) and 0.0005 g/cm³ (0.0001 g/cm² with ASTM D4052 option)	0.00005 g/cm³ and 0.0001 g/cm³
Cloud/freeze point repeatability and reproducibility	-	-	-	-	-	<0.5 °C / <0.5 °C and <2.5 °C / <1.3 °C	-
Temperature repeatability	0.005 °C			0.005 °C
Temperature reproducibility	0.03 °C from +15 °C to +100 °C			0.03 °C from +15 °C to +100 °C	0.03 °C from +15 °C to +100 °C		0.03 °C from +15 °C to +100 °C
Performance
Sample volume min. / typical	1.5 mL / 5 mL	3.5 mL / 8 mL		1.5 mL / 5 mL			2.5 mL / 6 mL
Solvent volume min. / typical	1.5 mL / 6 mL	5 mL / 10 mL		1.5 mL / 6 mL			2.5 mL / 10 mL
Max. sample throughput	37 samples per hour	21 samples per hour		33 samples per hour		30 samples per hour	24 samples per hour
Features
Optional upgrades	Second temperature		-	Automatic VI determination ASTM D4052-compliant density measurement	Chemical upgrade kit	-	-
					Modularity with Abbemat refractometers 300/500, 350/550, 450/650
Accessories	Magnetic particle trap (MPT)	-	-	Magnetic particle trap (MPT), hot filling attachment (HFA)		Magnetic particle trap (MPT)
Automation	-	Integrated Simple Fill Filling Device		Optional sample changer + High-Throughput Platform HTV		Optional sample changer + High-Throughput Platform HTV	Optional sample changer + High-Throughput Platform HTV
Technical Data
Data memory	1,000 measurement results
HID (Human Interface Device)	7" touchscreen			10.4" touchscreen, optional keyboard, mouse, and 2D bar code reader
Interfaces	4 x USB (3 x A, 1 xB)			4 x USB (2.0 full speed), 1 x Ethernet (100 Mbit), 1 X CAN bus, 1 x RS-232, 1 x VGA
Power supply	At instrument: DC, 24 V /3A, AC adapter 90 VAC to 264 VAC, 47 Hat to 63 Hz, < 75W			AC 100 V to 240 V, 50 Hz to 60 Hz, 250 VA max.
Ambient conditions	15 °C to 35 °C, max. 80 % r.h. non-condensing
Net weight in kg	5.6 kg	6.6 kg		15.9 kg	17.6 kg	18.0 kg	17.8 kg
Dimensions (W x D x H)	26.5 cm x 36.5 cm x 18 cm	33 cm x 36.5 cm x 20.5 cm		33 cm x 51 cm x 23.1 cm
Trademarks	SVM (13411996), FillingCheck (6834725), Abbemat (1084545)

*Viscosity range with chemical upgrade kit from 1 mPa·s to 10,000 mPa·s.
**Attested at the points of the works adjustment or at calibration correction points, not including the uncertainty of the standard