Oval Gear Flow Meter Suppliers in Melbourne

An Oval Gear Flow Meter is a type of positive displacement flow meter that measures the flow rate of fluids. It consists of two oval-shaped gears that rotate in a chamber, creating a flow path for the fluid. As the fluid flows through the chamber, it causes the gears to rotate, and the number of rotations is proportional to the flow rate. The rotation of the gears is detected by sensors, which convert the information into a digital signal that can be displayed on a meter or transmitted to a control system. Oval Gear Flow Meters are commonly used in industries such as oil and gas, chemical, food and beverage, and pharmaceuticals, where accurate measurement of fluid flow is critical.

Oval gear flow meters are highly accurate and reliable devices that are used to measure the flow rate of liquids. They are particularly useful for measuring the flow of viscous liquids, such as oil, chemicals, and food products. The benefits of using an oval gear flow meter include:

• High accuracy: Oval gear flow meters are highly accurate, with a typical accuracy of ±0.5% of the measured value. This makes them ideal for applications where precise measurement is required.
• Wide range of applications: Oval gear flow meters can be used to measure the flow of a wide range of liquids, including viscous liquids, corrosive liquids, and liquids with suspended solids.
• Low pressure drop: Oval gear flow meters have a low pressure drop, which means that they do not significantly affect the flow of the liquid being measured.
• Easy to install: Oval gear flow meters are easy to install and can be installed in a variety of orientations, including horizontal, vertical, and inclined.
• Low maintenance: Oval gear flow meters require very little maintenance, which makes them a cost-effective solution for measuring the flow of liquids.
• Long lifespan: Oval gear flow meters are durable and have a long lifespan, which means that they can be used for many years without needing to be replaced.

Digital output: Many oval gear flow meters have digital output options, which makes it easy to integrate them into a control system or data acquisition system.

There are several types of Oval Gear Flow Meters available in the market, including:

• Positive Displacement Oval Gear Flow Meters: These meters measure the flow of fluids by counting the number of revolutions of the oval gears as the fluid passes through them.
• Magnetic Inductive Oval Gear Flow Meters: These meters use a magnetic field to measure the flow of fluids. The oval gears have magnets embedded in them, and as they rotate, they generate a magnetic field that is detected by sensors.
• Ultrasonic Oval Gear Flow Meters: These meters use ultrasonic waves to measure the flow of fluids. The oval gears have ultrasonic sensors embedded in them, and as they rotate, they generate ultrasonic waves that are detected by sensors.
• Turbine Oval Gear Flow Meters: These meters use a turbine to measure the flow of fluids. The oval gears are connected to a turbine, and as the fluid passes through the meter, it causes the turbine to rotate, which is then measured.

Coriolis Oval Gear Flow Meters: These meters use the Coriolis effect to measure the flow of fluids. The oval gears are connected to a tube that is oscillated at a specific frequency, and as the fluid passes through the tube, it causes a change in the oscillation, which is then measured.

When selecting an Oval Gear Flow Meter, the following factors should be considered:

• Flow rate range: The flow rate range of the meter should match the expected flow rate of the application.
• Fluid compatibility: The meter should be compatible with the fluid being measured to ensure accurate and reliable readings.
• Viscosity range: The meter should be able to measure the viscosity range of the fluid being measured.
• Pressure rating: The meter should be able to withstand the pressure of the fluid being measured.
• Temperature range: The meter should be able to measure the temperature range of the fluid being measured.
• Accuracy: The meter should have a high level of accuracy to ensure precise readings.
• Repeatability: The meter should have a high level of repeatability to ensure consistent readings.
• Installation requirements: The meter should be easy to install and maintain.
• Cost: The cost of the meter should be considered in relation to the budget for the application.

Certification: The meter should be certified to meet industry standards and regulations.

The accuracy range of an Oval Gear Flow Meter is typically between ±0.5% to ±1% of the measured flow rate. However, this can vary depending on factors such as the viscosity of the fluid being measured, the size of the meter, and the quality of the installation.

However, the maximum flow rate that an Oval Gear Flow Meter can measure depends on various factors such as the size of the meter, the viscosity of the fluid being measured, and the pressure and temperature of the fluid. It is best to consult the manufacturer's specifications for the specific Oval Gear Flow Meter being used.

However, in general, the minimum flow rate that an Oval Gear Flow Meter can measure depends on the size of the meter and its sensitivity. Some models can measure flow rates as low as 0.1 liters per hour, while others may have a minimum flow rate of 1 liter per minute. It is important to consult the manufacturer's specifications for the specific model being used to determine its minimum flow rate capabilities.

However, in general, Oval Gear Flow Meters can operate in a wide range of temperatures and pressures depending on their design and materials of construction. Some models can handle temperatures ranging from -40°C to 200°C and pressures up to 1000 bar. It is important to consult the manufacturer's specifications for the specific Oval Gear Flow Meter being used to determine its temperature and pressure range.

The installation requirements for an Oval Gear Flow Meter include ensuring that the meter is installed in a horizontal position, with a straight pipe run before and after the meter to avoid turbulence and ensure accuracy. The meter should also be installed with the correct orientation, with the inlet and outlet connections matching the flow direction. The meter should be installed in a location that is easily accessible for maintenance and calibration. Additionally, the meter should be installed with appropriate piping and fittings that are compatible with the fluid being measured. Electrical connections should also be properly grounded and protected from moisture and other environmental factors.

The maintenance and calibration process for an Oval Gear Flow Meter involves several steps:

• Visual inspection: Check the meter for any signs of damage or wear and tear. Look for cracks, leaks, or other signs of damage.
• Cleaning: Clean the meter thoroughly to remove any debris or contaminants that may affect its accuracy.
• Calibration: Calibrate the meter using a standard reference fluid. This involves comparing the meter's readings to the known flow rate of the reference fluid.
• Adjustment: If the meter is not reading accurately, adjust it accordingly. This may involve adjusting the gear clearance or replacing worn parts.
• Verification: Verify the accuracy of the meter by testing it with a different reference fluid or by comparing its readings to those of another meter.

Record keeping: Keep a record of all maintenance and calibration activities, including the date, time, and results of each test. This will help you track the meter's performance over time and identify any issues that need to be addressed.