Cassel Food Metal Detector | PSQ RA

Cassel - Food Metal Detector | PSQ RA

Supplier: OFI Weigh & Inspection

Food Metal Detector | PSQ RA

1/2

The Metal Detector PSQ RA is a state-of-the-art inspection solution designed to ensure product safety in various industries.

Extremly resistant to weather, dirt or impact of stones and also immune to vibration
Simple and timesaving mounting: belt must not be devided due to a devidable probe
Can be used in the proximitry of frequency converters
Low difference in sensitivity on different sensing heights above the belt
CE-certified

Features

Average sensitivity (from M40 nuts)
Nearly homogeneous sensitivity on the belt and in the upper layers of the product
Can be used close to frequency converters, only 1 m minimum distance between probe and motors or magnets
Passage widths from 1 m to 2.4 m and heights can be adjusted as required
Extremely robust design
Very simple operation
Monitoring and display of internal parameters. (Helpful when calling for telephone support)

Function

The PSQ RA series of metal detector (opterating with a frame-probe) detects all kinds of metal, which means not only iron, but also aluminium, stainless steel, copper or mild steel.

The specialty of this detector is a low difference between edge and center of probe aperture. Therefore it is especially suitable if the depth of burden on the belt is more tan 600 mm. It’s frame can be devided and easily be built around the belt.

This metal detector prevents damage, avoids downtimes and produces significant savings on repair costs.

Specifications

Electronics
Digital signal processor, noise filter, digital balance control, digital frequency control, PowerDrive circuit
Input Signals
1 coaxial cable, probe
Output Signals
Metal alarm: 1 relais with 2 floating changeover contacts, switching capacity 230 V 5 A resistive load, switchable between normally relaxed or normally activated mode, Fault signal: 1 relais with 2 floating changeover contacts, switching capacity 230 V, 5 A resistive mode
Metal Detection
Iron, non-ferrous (e.g. aluminium or copper) und stainless steel
Belt widths
1000 – 2400 mm
Protection Type
Control box: IP 55, Frame probe: IP76
Ambience
Control box: -20° C up to +55° C, Frame probe: for execution PE up to +60° C, for execution PA6.6 up to +120° C
Power Supply
110-230 V, 50/60 Hz, typ. comsumption 15 VA
Material
Control box: steel or stainless steel, grey RAL 7032, electrophoretic dipcoating, Frame probe: stainless u-structure steel, Support for mounting: PE or PA6.66

Delivery Scope

Detection unit (sensor) PSQ RA
Controller in steel or stainless steel housing (wall mounting, 14 kg)

Application

Protection of tools and machines from metal parts such as nails or screws
Monitoring of particularly large and heavy products in recycling, mining or slag processing

To contact OFI Weigh & Inspection about Cassel Food Metal Detector | PSQ RA use Get a quote.

Extremly resistant to weather, dirt or impact of stones and also immune to vibration
Simple and timesaving mounting: belt must not be devided due to a devidable probe
Can be used in the proximitry of frequency converters
Low difference in sensitivity on different sensing heights above the belt
CE-certified

Features

Average sensitivity (from M40 nuts)
Nearly homogeneous sensitivity on the belt and in the upper layers of the product
Can be used close to frequency converters, only 1 m minimum distance between probe and motors or magnets
Passage widths from 1 m to 2.4 m and heights can be adjusted as required
Extremely robust design
Very simple operation
Monitoring and display of internal parameters. (Helpful when calling for telephone support)

Function

The PSQ RA series of metal detector (opterating with a frame-probe) detects all kinds of metal, which means not only iron, but also aluminium, stainless steel, copper or mild steel.

This metal detector prevents damage, avoids downtimes and produces significant savings on repair costs.

Specifications

Electronics
Digital signal processor, noise filter, digital balance control, digital frequency control, PowerDrive circuit
Input Signals
1 coaxial cable, probe
Output Signals
Metal alarm: 1 relais with 2 floating changeover contacts, switching capacity 230 V 5 A resistive load, switchable between normally relaxed or normally activated mode, Fault signal: 1 relais with 2 floating changeover contacts, switching capacity 230 V, 5 A resistive mode
Metal Detection
Iron, non-ferrous (e.g. aluminium or copper) und stainless steel
Belt widths
1000 – 2400 mm
Protection Type
Control box: IP 55, Frame probe: IP76
Ambience
Control box: -20° C up to +55° C, Frame probe: for execution PE up to +60° C, for execution PA6.6 up to +120° C
Power Supply
110-230 V, 50/60 Hz, typ. comsumption 15 VA
Material
Control box: steel or stainless steel, grey RAL 7032, electrophoretic dipcoating, Frame probe: stainless u-structure steel, Support for mounting: PE or PA6.66

Delivery Scope

Detection unit (sensor) PSQ RA
Controller in steel or stainless steel housing (wall mounting, 14 kg)

Application

Protection of tools and machines from metal parts such as nails or screws
Monitoring of particularly large and heavy products in recycling, mining or slag processing

Read less...

To contact OFI Weigh & Inspection about Cassel Food Metal Detector | PSQ RA use Get a quote.

CASSEL-Metal-detector-PSQ-DS-UN-200622(0.30MB)

CASSEL-Metal-detector-PSQ-DS-EN-200622(0.31MB)

AI Overview BETA

The Cassel PSQ RA is a frame-probe metal detector that identifies iron, aluminium, copper, stainless steel and other metals in products. Its sensitivity varies little between the aperture’s edges and centre, supporting detection in belt loads over 600 mm deep. For recycling, mining and slag processing, it monitors particularly large and heavy products on conveyor belts.

Dividable frame probe fits around the belt without splitting it
Frequency-converter operation; probe sits at least 1 m from motors or magnets
Passage widths from 1 m to 2.4 m; height adjusts as required
Control box IP55; frame probe IP76 protection ratings
CE-certified; controller housing is steel or stainless steel

Source: listing by OFI Weigh & Inspection on IndustrySearch · Updated 5 Nov 2026
Supplier document: CASSEL-Metal-detector-PSQ-DS-UN-200622 (PDF)

AI Overview is generated by artificial intelligence and may contain mistakes.

Let OFI Weigh & Inspection provide you with a quote

Supplier

Supplier: OFI Weigh & Inspection

Distribution: Australia & New Zealand

Location: Hoppers Crossing, VIC

Customers: Fonterra, Bega, Mondelez, IFF, Qantas, Toll, Amazon

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. OFI Weigh & Inspection are also proudly displaying these credentials:

Established:

2015

Employees:

6-20

Customers:

Fonterra, Bega, Mondelez, IFF, Qantas, Toll, Amazon

Memberships:

NMI, NATA, BRC

Distribution:

Australia & New Zealand

Location:

Hoppers Crossing , VIC